Wi-Fi Protected Setup (Wps); Using Wps To Connect To A Network - Epson WorkForce ST-C4100 User Manual

Note: If the
Repeat these steps to try again.
Parent topic:
Related references
Status Icon Information
Related tasks
Using the Epson Smart Panel Mobile App

Wi-Fi Protected Setup (WPS)

If your network uses a WPS-enabled wireless router or access point, you can quickly connect your
product to the network using Wi-Fi Protected Setup (WPS).
Note: To check if your router is WPS-enabled, look for a button labeled WPS on your router or access
point. If there is no hardware button, there may be a virtual WPS button in the software for the device.
Check your network product documentation for details.

Using WPS to Connect to a Network

Parent topic:
Using WPS to Connect to a Network
If you have a WPS-enabled wireless router or access point, you can use Wi-Fi Protected Setup (WPS) to
connect your product to the network.
1. Press the
2. Select the
Wi-Fi Direct icon is displayed on the LCD screen, Wi-Fi Direct is not enabled.
Wi-Fi Direct Mode Setup
Wi-Fi or Wired Networking
home button, if necessary.
icon.
45