Dialing Fax Numbers From A Connected Telephone - Epson WorkForce ST-C4100 User Manual

After scanning your originals, your product dials the number and sends the fax at the specified time.
Note: If the product is turned off at the specified time, the fax is sent when it is powered on.
Note: You cannot send another fax until the fax has been sent at the specified time. If you want to send
another one, you need to cancel the scheduled fax by selecting Fax on the Home screen and then
deleting it.
Parent topic:
Related topics
Setting Up Contacts and Contact Groups
Placing Originals on the Product

Dialing Fax Numbers from a Connected Telephone

If you connected a telephone to the EXT port on your product, you can send a fax by dialing the fax
number from the connected telephone. If the recipient's phone number and fax number are the same,
you can speak to the recipient before sending the fax.
1. Place your original on the product for faxing.
2. Press the
3. Dial the fax number from the connected telephone. Speak to the recipient if necessary.
Note: If you are using a pre-paid calling card, enter the number and password required to use the
card before entering the destination fax number.
4. Select Fax on the LCD screen.
5. Select Fax Settings and select any settings as necessary.
Note: Your product now communicates with the recipient's fax machine. Do not hang up the
telephone.
6. When you hear a fax tone, select Send to start sending the fax.
Note: If your recipient's fax machine does not print in color, your fax is automatically sent in black-
and-white.
7. Hang up the telephone.
Sending Faxes from the Product Control Panel
home button, if necessary.
193