Cleaning The Print Head Using A Computer Utility - Epson WorkForce ST-C4100 User Manual

• If there are gaps or the pattern is faint, select X. Follow the instructions on the screen to clean the
print head again.
• If almost the entire pattern is missing, select O and run a Power Cleaning.
If you don't see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 12 hours. Then run a nozzle check and try cleaning the print head again, if necessary. If quality
still does not improve, run a Power Cleaning.
Parent topic:
Related tasks
Refilling the Ink Tanks
Checking the Nozzles Using the Product Control Panel
Loading Paper in the Cassette

Cleaning the Print Head Using a Computer Utility

You can clean the print head using a utility on your Windows or Mac computer.
1. Make sure there are no errors on the LCD screen and the output tray is extended.
2. Load a few sheets of plain paper in the product.
3. Do one of the following:
• Windows: Access the Windows Desktop and right-click the
side of the Windows taskbar, or click the up arrow and right-click
• Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print &
Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select
Utility and select Open Printer Utility.
4. Select Print Head Cleaning.
Print Head Cleaning
icon for your product in the right
232
.