Network Interface Specifications - Epson WorkForce ST-C4100 User Manual

Hide thumbs Also See for WorkForce ST-C4100:
Table of Contents

Advertisement

Network Interface Specifications

Wi-Fi
Standard
Security
Frequency band
Connection modes
Maximum radio frequency
power transmitted
Ethernet
Standard
Communication modes
Connector
IEEE802.11 b/g/n; IEEE802.11n available only on the 20 MHz
channel
WEP (64/128 bit)
WPA-PSK (TKIP)
WPA2-PSK (AES); complies with WPA2 with support for
WPA/WPA2 Personal
WPA3-SAE (AES)
2.4 GHz
Infrastructure mode
Wi-Fi Direct (Simple AP); not supported for IEEE802.11b
Note: Wi-Fi Direct can be used simultaneously with Infrastructure or
Ethernet modes.
20 dBm (EIRP)
IEEE802.3i (10BASE-T); use a category 5e or higher STP (shielded
twisted pair) cable to prevent risk of radio interference
IEEE802.3u (100BASE-TX)
IEEE802.3az (Energy Efficient Ethernet); connected device should
be IEEE802.3az compliant
Auto, 10Mbps Full duplex, 10Mbps Half duplex, 100Mbps Full
duplex, 100Mbps Half duplex
RJ-45
320

Advertisement

Table of Contents
loading

Table of Contents