Cleaning The Print Head Using A Computer Utility - Epson WF-2950 User Manual

Print head needs Power Cleaning
6. Do one of the following:
• If there are no gaps, select O.
• If there are gaps or the pattern is faint, select X and continue. Follow the instructions on the screen
to clean the print head.
• If most lines are missing or not printed, most of the nozzles are clogged. Select O and then run a
Power Cleaning. See the link below.
7. Select Print to print a nozzle check pattern and confirm that the print head is clean.
If you don't see any improvement after cleaning the print head up to 3 times, turn the product off and wait
at least 12 hours. Then run a nozzle check, and try cleaning the print head if necessary. If quality still
does not improve, run a Power Cleaning.
Parent topic:
Related tasks
Checking the Nozzles Using the Product Control Panel
Power Cleaning Using the Product Control Panel
Related topics
Loading Paper

Cleaning the Print Head Using a Computer Utility

You can clean the print head using a utility on your Windows or Mac computer.
1. Load a few sheets of plain paper in the product.
Print Head Cleaning
227