Expasion Card Installation; Expasion Slots; Procedure For Expasion Card Installation - AMD 880G Series User Manual

NOTE! When you install DIMM module fully into the DIMM socket the eject tab should be
locked into the DIMM module very firmly and fit into its indention on both sides.
2-5 Expansion Card Installation
2-5-1 Expansion Slot
One PCI-Express2.0 x16@16 lane graphic slot offer 8Gbyte/sec data transfer rate at
each relative direction and up to 16Gbyte/sec concurrent bandwidth at full speed.
Fully compliant to the PCI Express Base Specification revision2.0, support PCI
Express VGA card, and other PCI Express devices. Two PCI-Express 2.0 slots and
two 32-bit PCI slots also guarantee the rich connectivity for the I/O of peripherals.
2-5-2 Procedure for Expansion Card Installation
1. Read the documentation for your expansion card and make any necessary
hardware or software setting for your expansion card such as jumpers.
2. Remove your computer's cover and the bracket plate on the slot you intend to use.
3. Align the card's connectors and press firmly.
4. Secure the card on the slot with the screen you remove above.
5. Replace the computer system's cover.
6. Set up the BIOS if necessary.
7. Install the necessary software driver for your expansion card.
DDRIII1 & DDRIII2:
Dual Channel
PCI-E 2.0x16 Slot@16-lane
32-bit PCI Slots
8
PCI-E Slots