Version 1 And Version 2; Order Codes - ALLEN & HEATH XONE 62 Service Manual

VERSION 1 and VERSION 2 Model Differences
There are minor changes between the original XONE:62 and the revised model
which replaced it in October 2000. This service manual covers both models.
Spares and support are available for both models. When servicing or ordering
spare parts for a XONE:62 first check which model it is.
The original model is referred to as VERSION 1. Its order code is XONE:62/.
Its key identifiers are:
The newer model is referred to as VERSION 2. Its order code is XONE2:62/.
Its key identifiers are:
The following is a summary of the differences introduced on VERSION 2:
Styling The original stainless steel finish is replaced with a new textured silver
paint. Several knob and pushbutton types have been changed to further co-
ordinate the styling. There are minor changes to the graphics.
Master Level Controls
replaced with a rotary master control.
Crossfader
original Alps version. These are not interchangeable with VERSION 1.
Power Supply
production efficiency.
The circuit information is mostly identical between the two models. Differences
are noted on the diagrams.

Order Codes

XONE:62 VERSION 1
XONE:62 VERSION 2
Rack Ears for plinth mounting
Rack Ears for 19" rack mounting
Crossfader Assembly VERSION 1
Crossfader Assembly VERSION 2
Stereo Fader Assembly
User Manual VERSION 1
User Manual VERSION2
Service Manual for both versions
XONE:62 Service Manual
Serial number sequence 020000
Stainless steel panel. Linear MIX master fader.
Serial number sequence 030000
Painted silver panel. Rotary MIX master control.
The original MIX master linear fader has been
The new high grade Penny & Giles fader is fitted instead of the
The power supply assembly was changed to improve
not available
XONE2:62/* (* = voltage)
XONE2:62-RK
XONE2:62-RK19
002-718 (Alps)
002-719 (P&G)
002-684
AP3754
AP4145
AP3842 (from issue 2)
7