Table of Contents
Advertisement
Toolbox
7.8.6 3G Dongle Sharing
You can share a 3G network when a USB 3G dongle is connected to your Wireless
Gateway.
1. Plug the USB 3G dongle to the USB port of your Wireless Gateway.
2. If the 3G dongle is supported, the Wireless Gateway automatically detects the
3G dongle in Home Network > Interfaces.
3. Follow the on-screen instructions on how to set up the access point and PIN of
the 3G dongle.
Notes on RF Exposure:
To comply with FCC/IC RF Exposure Limits set forth for an uncontrolled environment,
the product must be installed and operated with a minimum separation distance
(between nearby person(s) and radiating antenna) according to the following
scenarios:
1. 20cm minimum when the product is operated alone without co-transmitting
with a plug-in 3G USB dongle device.
2. 45cm minimum when the product is operated with a plug-in 3G USB device
which has a maximum of 7W ERP output power.
3. For co-transmission scenario which is not covered above, please consult the RF
technician or device supplier.
Wireless ADSL2+ Gateway
46
Advertisement
Table of Contents
