10
24/72 Maximum VDC Power Supply
Input/Output Cable Connection (MX3P)
Caution
LXE Part Number: 9000A316PS24V72VMX3P
Connecting the Power Supply to the MX3P Endcap Power Jack
MX3 Cradle Reference Guide
For proper and safe installation, the input power cable must be connected to a fused
circuit on the vehicle. This fused circuit requires a 5 Amp maximum time delay (slow
blow) fuse. If the supply connection is made directly to the battery, the fuse should be
installed in the positive lead within 5 inches of the battery positive (+) terminal.
Recommended for vehicle electrical systems that use between 2 and 5 twelve volt
batteries in series.
Vehicle Power Supply, 24 – 72 Maximum VDC (Fuse Not Shown)
DIAGRAM IS NOT TO SCALE
Vehicle Power Supply Footprint
Appendix B Obsolete Equipment
5. Power Switch
6. Power On Indicator
7. Output to MX3P
8. Input from Vehicle Battery
Power Supply Dimensions
Length 9.25"
Height 2.5"
Width 4.7"
Mounting hole center Width: 3.5"
Mounting hole center Length: 8.75"
E-EQ-MX3DKRG-J-ARC