HIKVISION DS-K1T643 Series User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Digital Camera
  5. DS-K1T643 Series
  6. User manual

HIKVISION DS-K1T643 Series User Manual

Face recognition terminal
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DS-K1T643 Series Face Recognition Terminal
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DS-K1T643 Series and is the answer not in the manual?

Questions and answers

Related Manuals for HIKVISION DS-K1T643 Series

Summary of Contents for HIKVISION DS-K1T643 Series

  • Page 1 DS-K1T643 Series Face Recognition Terminal User Manual...
  • Page 2 WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY, OR FITNESS FOR A PARTICULAR PURPOSE. THE USE OF THE PRODUCT BY YOU IS AT YOUR OWN RISK. IN NO EVENT WILL HIKVISION BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES,...
  • Page 3 During the use of device, personal data will be collected, stored and processed. To protect data, the development of Hikvision devices incorporates privacy by design principles. For example, for device with facial recognition features, biometrics data is stored in your device with encryption method;...
  • Page 4 DS-K1T643 Series Face Recognition Terminal User Manual Symbol Conventions The symbols that may be found in this document are defined as follows. Symbol Description Indicates a hazardous situation which, if not avoided, will or could Danger result in death or serious injury.
  • Page 5 DS-K1T643 Series Face Recognition Terminal User Manual Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
  • Page 6 DS-K1T643 Series Face Recognition Terminal User Manual under the EMC Directive 2014/30/EU, RE Directive 2014/53/EU,the RoHS Directive 2011/65/EU 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 7 DS-K1T643 Series Face Recognition Terminal User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into Dangers and Cautions: Dangers: Neglecting any of the warnings may cause serious injury or death.
  • Page 8 DS-K1T643 Series Face Recognition Terminal User Manual • + identifies the positive terminal(s) of equipment which is used with, or generates direct current. - identifies the negative terminal(s) of equipment which is used with, or generates direct current. • CAUTION: This bracket is intended for use only with DS-K1T341BMI-T/DS-K1T341BMWI-T face recognition terminal.
  • Page 9 DS-K1T643 Series Face Recognition Terminal User Manual • Please keep all wrappers after unpack them for future use. In case of any failure occurred, you need to return the device to the factory with the original wrapper. Transportation without the original wrapper may result in damage on the device and lead to additional costs.
  • Page 10 DS-K1T643 Series Face Recognition Terminal User Manual Available Models Product Name Model Face Recognition Terminal DS-K1T643MX-T DS-K1T643MWX-T Use only power supplies listed in the user instructions: Model Manufacturer Standard ADS-26FSG-12 12024EPG Shenzhen Honor Electronic Co.,Ltd MSA-C2000IC12.0-24P-DE MOSO Technology Co.,Ltd ADS-26FSG-12 12024EPB Shenzhen Honor Electronic Co.,Ltd...

  • Page 11: Table Of Contents

    DS-K1T643 Series Face Recognition Terminal User Manual Contents Chapter 1 Overview ........................1 1.1 Overview ..........................1 1.2 Features ..........................1 Chapter 2 Appearance ........................ 3 Chapter 3 Installation ......................... 5 3.1 Installation Environment ......................5 3.2 Flush Mounting with Gang Box ....................5 3.3 Install without Gang Box ......................
  • Page 12 DS-K1T643 Series Face Recognition Terminal User Manual 7.1.1 Login by Administrator ....................26 7.1.2 Login by Activation Password ..................28 7.2 Communication Settings ...................... 30 7.2.1 Set Wired Network Parameters .................. 30 7.2.2 Set Wi-Fi Parameters ....................31 7.2.3 Set RS-485 Parameters ....................33 7.2.4 Set Wiegand Parameters .....................
  • Page 13 DS-K1T643 Series Face Recognition Terminal User Manual 7.12 Video Intercom ........................56 7.12.1 Call Client Software from Device ................56 7.12.2 Call Center from Device .................... 57 7.12.3 Call Device from Client Software ................57 7.12.4 Call Room from Device ....................58 7.12.5 Call Mobile Client from Device ..................
  • Page 14 DS-K1T643 Series Face Recognition Terminal User Manual 8.5.17 Time and Attendance Settings .................. 76 8.5.18 Set Video Intercom Parameters ................79 8.5.19 Configure SIP Parameters ..................80 8.5.20 Access Control Settings ..................... 81 8.5.21 Set Biometric Parameters ..................88 8.5.22 Set Notice Publication ....................91 8.5.23 Temperature Measurement Settings ................
  • Page 15 DS-K1T643 Series Face Recognition Terminal User Manual 9.7.1 Configure Device Parameters ..................111 9.7.2 Configure Device Parameters ..................118 9.8 Door/Elevator Control ......................121 9.8.1 Control Door Status ....................121 9.8.2 Check Real-Time Access Records ................122 Appendix A. Tips When Collecting/Comparing Face Picture ............ 125 Appendix B.

  • Page 16: Chapter 1 Overview

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 1 Overview 1.1 Overview The face recognition terminal is a kind of access control device integrated with temperature screening function. It can fast taking skin-surface temperature and upload abnormal temperature event to the center, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.
  • Page 17 DS-K1T643 Series Face Recognition Terminal User Manual • Imports and export data to the device from the client software • Supports simple theme • Supports configuration via Web • Supports ISUP 5.0...

  • Page 18: Chapter 2 Appearance

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 2 Appearance Refer to the following contents for detailed information of the face recognition terminal: Figure 2-1 Face Recognition Terminal Diagram Table 2-1 Description of Face Recognition Terminal Name TAMPER Touch Screen...
  • Page 19 DS-K1T643 Series Face Recognition Terminal User Manual Name Network Interface Debugging Port Note The debug terminal is used for debugging only.

  • Page 20: Chapter 3 Installation

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 3 Installation 3.1 Installation Environment • Avoid backlight, direct sunlight, and indirect sunlight. • For better face recognition, there should be light source in or near the installation environment. • Sunlight, wind, hot/cool air from air conditioner and other external factors, which may affect surface temperature, will create the deviation of the temperature measurement.
  • Page 21 DS-K1T643 Series Face Recognition Terminal User Manual Figure 3-1 Install Gang Box 2. Use 2 supplied screws (KA4*22) to secure the mounting plate on the gang box. Figure 3-2 Install Mounting Plate 3. Remove the 2 screws on the rear panel and remove the sheet to display the wiring terminals.

  • Page 22: Install Without Gang Box

    DS-K1T643 Series Face Recognition Terminal User Manual Note Make sure the 2 sheets on each side of the mounting plate have been in the holes at the back of the device. 7. Use 2 supplied M3*8 screws to secure the device and the mounting plate.
  • Page 23 DS-K1T643 Series Face Recognition Terminal User Manual Figure 3-4 Mounting Template 2. Drill holes on the wall or other surface according to the instructions on the mounting template. 3. Align the holes to the mounting plate and secure the mounting plate on the wall with the 3...
  • Page 24 DS-K1T643 Series Face Recognition Terminal User Manual Figure 3-5 Install Mounting Plate 4. Remove the 2 screws on the rear panel and remove the sheet to display the wiring terminals. 5. Route the cable through the cable hole of the mounting plate, and connect to corresponding external devices' cables.

  • Page 25: Chapter 4 Wiring

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 4 Wiring The device supports connecting to the RS-485 terminal, the door lock, the exit button, the alarm output/input devices, the Wiegand card reader, the access controller, and the power supply. You can wire the peripherals according to the descriptions below.

  • Page 26: Wire Normal Device

    DS-K1T643 Series Face Recognition Terminal User Manual Group Function Color Name Description White/Red Lock Wiring (NO) Yellow/Green SENSOR Door Contact Black Ground Yellow/Gray BUTTON Exit Door Wiring Yellow/Black Ground 4.2 Wire Normal Device You can connect the terminal with normal peripherals.

  • Page 27: Wire Secure Door Control Unit

    DS-K1T643 Series Face Recognition Terminal User Manual Note • You should set the face recognition terminal's Wiegand direction as Input to connect to a Wiegand card reader. If connects to an access controller, you should set the Wiegand direction as Output to transmit authentication information to the access controller.

  • Page 28: Wire Fire Module

    DS-K1T643 Series Face Recognition Terminal User Manual 4.4 Wire Fire Module 4.4.1 Wiring Diagram of Door Open When Powering Off Lock Type: Anode Lock, Magnetic Lock, and Electric Bolt (NO) Security Type: Door Open When Powering Off Scenario: Installed in Fire Engine Access...

  • Page 29: Wiring Diagram Of Door Locked When Powering Off

    DS-K1T643 Series Face Recognition Terminal User Manual Type 2 Note The fire system (NO and COM, normally open when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NO and COM are closed.
  • Page 30 DS-K1T643 Series Face Recognition Terminal User Manual Note • The Uninterpretable Power Supply (UPS) is required. • The fire system (NC and COM, normally closed when powering off) is connected with the lock and the power supply in series. When an fire alarm is triggered, the door remains open. In normal times, NC and COM are open.

  • Page 31: Chapter 5 Activation

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 5 Activation You should activate the device before the first login. After powering on the device, the system will switch to Device Activation page. Activation via the device, SADP tool and the client software are supported.
  • Page 32 DS-K1T643 Series Face Recognition Terminal User Manual Figure 5-1 Activation Page Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 33: Activate Via Sadp

    • Get the SADP software from the supplied disk or the official website http:// www.hikvision.com/en/ , and install the SADP according to the prompts. • The device and the PC that runs the SADP tool should be within the same subnet.

  • Page 34: Activate Device Via Client Software

    DS-K1T643 Series Face Recognition Terminal User Manual Status of the device becomes Active after successful activation. 5. Modify IP address of the device. 1) Select the device. 2) Change the device IP address to the same subnet as your computer by either modifying the IP address manually or checking Enable DHCP.

  • Page 35: Activate Via Web Browser

    DS-K1T643 Series Face Recognition Terminal User Manual three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product. And we recommend you change your password regularly, especially in the high security system, changing the password monthly or weekly can better protect your product.

  • Page 36: Chapter 6 Quick Operation

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 6 Quick Operation 6.1 Set Application Mode After activating the device, you should select an application mode for better device application. Steps 1. On the Welcome page, select Indoor or Others from the drop-down list.

  • Page 37: Set Network Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual Note • You can also change the settings in System Settings. • If you install the device indoors near the window or the face recognition function is not working well, select Others. • If you do not configure the application mode and tap Next, the system will select Indoor by default.
  • Page 38 DS-K1T643 Series Face Recognition Terminal User Manual Figure 6-2 Select Network Note Disconnect the wired network before connecting a Wi-Fi. 2. Tap Next. Wired Network Note Make sure the device has connected to a network. If enable DHCP, the system will assign the IP address and other parameters automatically.

  • Page 39: Set Administrator

    DS-K1T643 Series Face Recognition Terminal User Manual Select a Wi-Fi and enter the Wi-Fi's password to get connected. Or tap Add Wi-Fi and enter the Wi-Fi's name and the password to get connected. 3. Optional: Tap Skip to skip network settings.
  • Page 40 DS-K1T643 Series Face Recognition Terminal User Manual 3. Select a credential to add. Note Up to one credential should be added. : Face forward at the camera. Make sure the face is in the face recognition area. Click to capture and click to confirm.

  • Page 41: Chapter 7 Basic Operation

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 7 Basic Operation 7.1 Login Login the device to set the device basic parameters. 7.1.1 Login by Administrator If you have added an administrator for the device, only the administrator can login the device for device operation.
  • Page 42 DS-K1T643 Series Face Recognition Terminal User Manual Figure 7-1 Admin Login 2. Authenticate the administrator's face or card to enter the home page.

  • Page 43: Login By Activation Password

    DS-K1T643 Series Face Recognition Terminal User Manual Figure 7-2 Home Page Note The device will be locked for 30 minutes after 5 failed attempts. 3. Optional: Tap and you can enter the device activation password for login. 4. Optional: Tap and you can exit the admin login page.
  • Page 44 DS-K1T643 Series Face Recognition Terminal User Manual Steps 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture to enter password entering page. 2. Tap the Password field and enter the device activation password.

  • Page 45: Communication Settings

    DS-K1T643 Series Face Recognition Terminal User Manual 7.2 Communication Settings You can set the network parameters, the Wi-Fi parameter, the RS-485 parameters, and the Wiegand parameters on the communication settings page. 7.2.1 Set Wired Network Parameters You can set the device wired network parameters, including the IP address, the subnet mask, the gateway, and DNS parameters.

  • Page 46: Set Wi-Fi Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual Note The device's IP address and the computer IP address should be in the same IP segment. 4. Set the DNS parameters. You can enable Auto Obtain DNS, set the preferred DNS server and the alternate DNS server.
  • Page 47 DS-K1T643 Series Face Recognition Terminal User Manual Figure 7-5 Wi-Fi Settings 3. Enable the Wi-Fi function. 4. Configure the Wi-Fi parameters. - Select a Wi-Fi from the list, and enter the Wi-Fi's password. Tap OK. - If the target Wi-Fi is not in the list,tap Add Wi-Fi. Enter the Wi-Fi's name and password. And tap OK.

  • Page 48: Set Rs-485 Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual 6. Tap OK to save the settings and go back to the Wi-Fi tab. 7. Tap to save the network parameters. 7.2.3 Set RS-485 Parameters The face recognition terminal can connect external access controller, secure door control unit or card reader via the RS-485 terminal.

  • Page 49: Set Wiegand Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual 7.2.4 Set Wiegand Parameters You can set the Wiegand transmission direction. Steps 1. Tap Comm. (Communication Settings) on the Home page to enter the Communication Settings page. 2. On the Communication Settings page, tap Wiegand to enter the Wiegand tab.

  • Page 50: Add Face Picture

    DS-K1T643 Series Face Recognition Terminal User Manual Steps 1. Long tap on the initial page and log in the backend. 2. Tap User → + to enter the Add User page. 3. Edit the employee ID. Note • The employee ID should be less than 32 characters. And it can be a combination of lower letters, upper letters, and numbers.
  • Page 51 DS-K1T643 Series Face Recognition Terminal User Manual 1. Long tap on the initial page for 3 s and slide to the left/right by following the gesture and log in the backend. 2. Tap User → + to enter the Add User page.
  • Page 52 DS-K1T643 Series Face Recognition Terminal User Manual Figure 7-8 Add Face Picture 6. Look at the camera. Note • Make sure your face picture is in the face picture outline when adding the face picture. • Make sure the captured face picture is in good quality and is accurate.

  • Page 53: Add Card

    DS-K1T643 Series Face Recognition Terminal User Manual Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page.

  • Page 54: View Password

    DS-K1T643 Series Face Recognition Terminal User Manual Note • The card No. cannot be empty. • Up to 20 characters are allowed in the card No. • The card No. cannot be duplicated. 8. Configure the card type. 9. Set the user role.

  • Page 55: Set Authentication Mode

    DS-K1T643 Series Face Recognition Terminal User Manual Administrator The user is the administrator. Except for the normal attendance function, the user can also enter the Home page to operate after authenticating the permission. Normal User The User is the normal user. The user can only authenticate or take attendance on the initial page.

  • Page 56: Temperature Measurement Settings

    DS-K1T643 Series Face Recognition Terminal User Manual Note The employee ID cannot be edited. 7.4 Temperature Measurement Settings You can set the temperature measurement parameters, including temperature detection, over- temperature alarm threshold, temperature compensation, door not open when temperature is abnormal, temperature measurement mode, temperature unit, etc.

  • Page 57: Delete Data

    DS-K1T643 Series Face Recognition Terminal User Manual Table 7-1 Temperature Measurement Parameters Descriptions Parameter Description Temp. Detection When enabling the function, the device will authenticate the permissions and at the same time take the temperature. When disabling the device, the device will authenticate the permissions only.

  • Page 58: Authenticate Via Multiple Credential

    DS-K1T643 Series Face Recognition Terminal User Manual Authenticate face, fingerprint, card or QR code. Face Face forward at the camera and start authentication via face. Fingerprint Place the enrolled fingerprint on the fingerprint module and start authentication via fingerprint. Card Present the card on the card presenting area and start authentication via card.

  • Page 59: Basic Settings

    DS-K1T643 Series Face Recognition Terminal User Manual Note • For detailed information about scanning fingerprint, see Tips for Scanning Fingerprint. • For detailed information about authenticating face, see Tips When Collecting/Comparing Face Picture. If authentication succeeded, the prompt "Authenticated" will pop up.
  • Page 60 DS-K1T643 Series Face Recognition Terminal User Manual Shortcut Key Choose the shortcut key that displayed on the authentication page, including the call function, call type, and the password entering function. Note • You can select call type from Call Room, Call Center, and Call Specified Room No.

  • Page 61: Set Biometric Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual 7.8 Set Biometric Parameters You can customize the face parameters to improve the face recognition performance. The configurable parameters includes application mode, face liveness level, face recognition distance, face recognition interval, wide dynamic, face 1:N security level, face 1:1 security level, ECO settings, and face with mask detection.

  • Page 62: Set Access Control Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual Parameter Description ECO Mode (1:1) Set the matching threshold when authenticating via ECO mode 1:1 matching mode. The larger the value, the smaller the false accept rate and the larger the false rejection rate.
  • Page 63 DS-K1T643 Series Face Recognition Terminal User Manual Figure 7-12 Access Control Parameters The available parameters descriptions are as follows: Table 7-3 Access Control Parameters Descriptions Parameter Description Terminal Auth. Mode (Terminal Select the face recognition terminal's authentication mode. You Authentication Mode) can also customize the authentication mode.

  • Page 64: Time And Attendance Status Settings

    DS-K1T643 Series Face Recognition Terminal User Manual Parameter Description Door Contact You can select "Open (Remain Open)" or "Close (Remian Closed)" according to your actual needs. By default, it is Close (Remian Closed). Open Duration Set the door unlocking duration. If the door is not opened for the set time, the door will be locked.

  • Page 65: Set Manual Attendance Via Device

    DS-K1T643 Series Face Recognition Terminal User Manual 7.10.2 Set Manual Attendance via Device Set the attendance mode as manual, and you should select a status manually when you take attendance. Before You Start Add at least one user, and set the user's authentication mode. For details, see User Management.

  • Page 66: Set Auto Attendance Via Device

    DS-K1T643 Series Face Recognition Terminal User Manual Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. 7.10.3 Set Auto Attendance via Device Set the attendance mode as auto, and you can set the attendance status and its available schedule.

  • Page 67: Set Manual And Auto Attendance Via Device

    DS-K1T643 Series Face Recognition Terminal User Manual The name will be displayed on the T & A Status page and the authentication result page. 6. Set the status' schedule. 1) Tap Attendance Schedule. 2) Select Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, or Sunday.
  • Page 68 DS-K1T643 Series Face Recognition Terminal User Manual Figure 7-16 Manual and Auto Mode 3. Enable the Attendance Status function. 4. Enable a group of attendance status. Note The Attendance Property will not be changed. 5. Optional: Select an status and change its name if required.

  • Page 69: System Maintenance

    DS-K1T643 Series Face Recognition Terminal User Manual select a status to take attendance manually, the authentication will be marked as the edited attendance status. Example If set the Break Out as Monday 11:00, and Break In as Monday 12:00, the valid user's authentication from Monday 11:00 to 12:00 will be marked as break.
  • Page 70 DS-K1T643 Series Face Recognition Terminal User Manual Figure 7-17 Maintenance Page System Information You can view the device model, serial No., versions, address, production data, QR code, and open source code license. Note The page may vary according to different device models. Refers to the actual page for details.

  • Page 71: Video Intercom

    DS-K1T643 Series Face Recognition Terminal User Manual Unlink APP Account After unlinking APP account, you cannot operate via APP. Restore to Default Settings All parameters, except for the communication settings, remotely imported user information, will be restored to the default settings. The system will reboot to take effect.

  • Page 72: Call Center From Device

    DS-K1T643 Series Face Recognition Terminal User Manual 7.12.2 Call Center from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up.

  • Page 73: Call Room From Device

    DS-K1T643 Series Face Recognition Terminal User Manual 7.12.4 Call Room from Device Steps 1. Get the client software from the supplied disk or the official website, and install the software according to the prompts. 2. Run the client software and the control panel of the software pops up.

  • Page 74: Chapter 8 Operation Via Web Browser

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 8 Operation via Web Browser 8.1 Login You can login via the web browser or the remote configuration of the client software. Note Make sure the device is activated. For detailed information about activation, see Activation .

  • Page 75: Person Management

    DS-K1T643 Series Face Recognition Terminal User Manual Select the image size when starting live view. Set the volume when starting live view. Note If you adjust the volume when starting two-way audio, you may hear a repeated sounds. You can capture image when starting live view.

  • Page 76: Search Event

    DS-K1T643 Series Face Recognition Terminal User Manual Add Face Picture Click User → Add to enter the Add Person page. Click + on the right to upload a face picture from the local PC. Note The picture format should be JPG, JPEG or PNG. The size should be less than 200K.

  • Page 77: Configuration

    DS-K1T643 Series Face Recognition Terminal User Manual Figure 8-2 Search Page Enter the search conditions, including the employee ID, the name, the card No., the start time, and the end time, and click Search. The results will be displayed on the right panel.

  • Page 78: View Device Information

    DS-K1T643 Series Face Recognition Terminal User Manual You can also click Open to open the file folder to view details. Set Captured Pictures Saving Path Click Configuration → Local to enter the Local page. Select a saving path from your local computer and click Save.

  • Page 79: Set Dst

    DS-K1T643 Series Face Recognition Terminal User Manual By default, the device time should be synchronized manually. You can set the device time manually or check Sync. with Computer Time to synchronize the device time with the computer's time. 8.5.4 Set DST Steps 1.
  • Page 80 DS-K1T643 Series Face Recognition Terminal User Manual Figure 8-5 Upgrade and Maintenance Page Click Reboot to start reboot the device. Restore Parameters Click Configuration → System → Maintenance → Upgrade & Maintenance . Default The device will restore to the default settings, except for the device IP address and the user information.

  • Page 81: Log Query

    DS-K1T643 Series Face Recognition Terminal User Manual Note Do not power off during the upgrading. 8.5.7 Log Query You can search and view the device logs. Go to Configuration → System → Maintenance → Log Query . Set the major and minor type of the log type. Set the start time and end time for searching, and click Search.
  • Page 82 DS-K1T643 Series Face Recognition Terminal User Manual Note The function is only supported by certain device models. Create and Install Self-signed Certificate Steps 1. Go to Configuration → System → Security → Certificate Management . 2. In the Certificate Files area, select a Certificate Type from the drop-down list.

  • Page 83: Change Administrator's Password

    DS-K1T643 Series Face Recognition Terminal User Manual Note The input certificate ID cannot be the same as the existing ones. 3. Upload a certificate file from the local. 4. Click Install. 8.5.10 Change Administrator's Password Steps 1. Click Configuration → User Management .
  • Page 84 DS-K1T643 Series Face Recognition Terminal User Manual Figure 8-6 TCP/IP Settings Page Set the parameters and click Save to save the settings. DHCP If uncheck the function, you should set the IPv4 address, IPv4 subnet mask, IPv4 default gateway, MTU, and the device port.
  • Page 85 DS-K1T643 Series Face Recognition Terminal User Manual Set the HTTPS for accessing the browser. Certificate is required when accessing. Server It refers to the port through which the client adds the device. Set Wi-Fi Parameters Set the Wi-Fi parameters for device wireless connection.
  • Page 86 DS-K1T643 Series Face Recognition Terminal User Manual You can set the center group and the system will transfer logs via ISUP protocol. Click Save to save the settings. Center Group Select a center group from the drop-down list. Main Channel The device will communicate with the center via the main channel.

  • Page 87: Set Video And Audio Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual Note If you select 5.0 as the version, you should set the ISUP key as well. 5. Click Save. Configure HTTP Listening The device can send alarm information to the destination IP or host via HTTP protocol/HTTPS protocol.

  • Page 88: Customize Audio Content

    DS-K1T643 Series Face Recognition Terminal User Manual Figure 8-8 Video Settings Page Set the stream type, the video type, the bitrate type, the frame rate, the Max. bitrate, and the video encoding. Click Save to save the settings after the configuration.
  • Page 89 DS-K1T643 Series Face Recognition Terminal User Manual Figure 8-9 Customize Audio Content 2. set the appellation. 3. Enable the function. 4. Set the time duration when authentication succeeded. 1) Click Add. 2) Set the time duration and the language. Note If authentication is succeeded in the configured time duration, the device will broadcast the configured content.

  • Page 90: Set Image Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual 8.5.15 Set Image Parameters Set the video standard, WDR, brightness, contrast, saturation, and sharpness. Steps 1. Click Configuration → Image Adjustment . Figure 8-10 Image Settings Page 2. Configure the parameters to adjust the image.

  • Page 91: Set Supplement Light Brightness

    DS-K1T643 Series Face Recognition Terminal User Manual Capture the image. 3. Click Default to restore the parameters to the default settings. 8.5.16 Set Supplement Light Brightness Set the device supplement light brightness. Steps 1. Click Configuration → Image → Supplement Light Parameters .
  • Page 92 DS-K1T643 Series Face Recognition Terminal User Manual Steps 1. Click Configuration → Attendance to enter the settings page. 2. Set the Attendance Mode as Disable. Result You will not view or configure the attendance status on the initial page. And the system will follow the attendance rule that configured on the platform.
  • Page 93 DS-K1T643 Series Face Recognition Terminal User Manual Note If you do not select a status, the authentication will be failed and it will not be marked as a valid attendance. Set Auto Attendance via Web Set the attendance mode as auto, and you can set the attendance status and its available schedule.

  • Page 94: Set Video Intercom Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual Result On the initial page and authenticate. The authentication will be marked as the configured attendance status according to the schedule. If you tap the edit icon on the result tab, you can select a status to take attendance manually, the authentication will be marked as the edited attendance status.

  • Page 95: Configure Sip Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual Period No. Set the device installed period No. Building No. Set the device installed building No. Unit No. Set the device installed unit No. Floor No. Set the device installed floor No. Door Station No.

  • Page 96: Access Control Settings

    DS-K1T643 Series Face Recognition Terminal User Manual Go to Configuration → Access Control → Linked Network Settings . Set the main station's IP address and SIP server's IP address. Click Save. 8.5.20 Access Control Settings Set Authentication Parameters Click Configuration → Access Control → Authentication Settings .
  • Page 97 DS-K1T643 Series Face Recognition Terminal User Manual Enable Card Reader Enable the card reader's function. Authentication Select an authentication mode according to your actual needs from the drop-down list. Display Authentication Result Check Face Picture, Name, or Employee ID. When authentication is completed, the system will display the selected contents in the result.
  • Page 98 DS-K1T643 Series Face Recognition Terminal User Manual When the access control device cannot connect with the card reader for longer than the set time, the card reader will turn offline automatically. Max. Interval When Entering Password When you entering the password on the card reader, if the interval between pressing two digits is longer than the set value, the digits you pressed before will be cleared automatically.
  • Page 99 DS-K1T643 Series Face Recognition Terminal User Manual Door Open Timeout Alarm An alarm will be triggered if the door has not been closed within the configured time duration. Door Contact You can set the door contact as Remain Open or Remain Closed according to your actual needs.
  • Page 100 DS-K1T643 Series Face Recognition Terminal User Manual M1 card encryption can improve the security level of authentication. Enable the function and set the encryption sector. By default, Sector 13 is encrypted. It is recommended to encrypt sector 13. Enable EM Card Enable EM card and authenticating by presenting EM card is available.
  • Page 101 DS-K1T643 Series Face Recognition Terminal User Manual Steps Note Some device models do not support this function. Refer to the actual products when configuration. 1. Click Configuration → Access Control → Wiegand Settings . Figure 8-15 Wiegand Page 2. Check Wiegand to enable the Wiegand function.
  • Page 102 DS-K1T643 Series Face Recognition Terminal User Manual Set Privacy Parameters Set the event storage type, picture upload and storage parameters, and the picture clearing parameters. Go to Configuration → Access Control → Privacy Event Storage Settings Select a method to delete the event. You can select from Delete Old Events Periodically, Delete Old Events by Specified Time, or Overwriting.

  • Page 103: Set Biometric Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual If you enable this function, you can save the thermographic picture captured to the device. Clear All Pictures in Device Note All pictures cannot be restored once they are deleted. Clear Registered Face Pictures All registered pictures in the device will be deleted.
  • Page 104 DS-K1T643 Series Face Recognition Terminal User Manual Figure 8-16 Smart Settings Page Click Save to save the settings after the configuration. Face Anti-spoofing Enable or disable the live face detection function. If enabling the function, the device can recognize whether the person is a live one or not.
  • Page 105 DS-K1T643 Series Face Recognition Terminal User Manual Face Recognition Mode Normal Mode Recognize face via the camera normally. Deep Mode The device can recognize a much wider people range than the normal mode. This mode is applicable to a more complicated environment.

  • Page 106: Set Notice Publication

    DS-K1T643 Series Face Recognition Terminal User Manual After enabling the face with mask detection, the system will recognize the captured face with mask picture. You can set face with mask1:N matching threshold, it's ECO mode, and the strategy. None The device will detect the face with mask without prompt.

  • Page 107: Temperature Measurement Settings

    DS-K1T643 Series Face Recognition Terminal User Manual 8.5.23 Temperature Measurement Settings Temperature Measurement Settings You can set the temperature measurement parameters, including temperature measurement only, temperature unit, over-temperature threshold, temperature compensation, door not open when temperature is abnormal, etc. Steps 1.
  • Page 108 DS-K1T643 Series Face Recognition Terminal User Manual Parameter Description Note After enabling Temperature Measurement Only, you can enable Capture White Light Picture. After enabling Capture White Light Picture, the picture will be captured when authenticating. Unit Select a temperature unit according to your preference.
  • Page 109 DS-K1T643 Series Face Recognition Terminal User Manual Figure 8-19 Black Body Settings 2. Enable black body correction function. 3. Put a black body in front of the camera. Make sure there are no other objects between the camera and the black body.

  • Page 110: Chapter 9 Client Software Configuration

    DS-K1T643 Series Face Recognition Terminal User Manual Chapter 9 Client Software Configuration 9.1 Configuration Flow of Client Software Follow the flow diagram below to configure on the client software. Figure 9-1 Flow Diagram of Configuration on Client Software 9.2 Device Management The client supports managing access control devices and video intercom devices.

  • Page 111: Add Device

    DS-K1T643 Series Face Recognition Terminal User Manual 9.2.1 Add Device The client provides three device adding modes including by IP/domain, IP segment, and ISUP protocol. The client also supports importing multiple devices in a batch when there are large amount of devices to be added.
  • Page 112 DS-K1T643 Series Face Recognition Terminal User Manual 5. Optional: Check Transmission Encryption (TLS) to enable transmission encryption using TLS (Transport Layer Security) protocol for security purpose. Note • This function should be supported by the device. • If you have enabled Certificate Verification, you should click Open Certificate Directory to open the default folder, and copy the certificate file exported from the device to this default directory to strengthen the security.

  • Page 113: Reset Device Password

    DS-K1T643 Series Face Recognition Terminal User Manual Enter the device port number. The default port number is 8000. User Name Enter the device user name. By default, the user name is admin. Password Enter the device password. Caution The password strength of the device can be automatically checked. We highly recommend...

  • Page 114: Manage Added Devices

    DS-K1T643 Series Face Recognition Terminal User Manual Caution The password strength of the device can be automatically checked. We highly recommend you change the password of your own choosing (using a minimum of 8 characters, including at least three kinds of following categories: upper case letters, lower case letters, numbers, and special characters) in order to increase the security of your product.

  • Page 115: Group Management

    DS-K1T643 Series Face Recognition Terminal User Manual 9.3 Group Management The client provides groups to manage the added resources in different groups. You can group the resources into different groups according to the resources' locations. Example For example, on the 1st floor, there mounted 16 doors, 64 alarm inputs, and 16 alarm outputs. You can organize these resources into one group (named 1st Floor) for convenient management.

  • Page 116: Person Management

    DS-K1T643 Series Face Recognition Terminal User Manual Note You can click to switch the resource display mode to thumbnail view or to list view. 6. Click Import to import the selected resources to the group. 9.4 Person Management You can add person information to the system for further operations such as access control, video intercom, time and attendance, etc.

  • Page 117: Import And Export Person Identify Information

    DS-K1T643 Series Face Recognition Terminal User Manual 9.4.2 Import and Export Person Identify Information You can import the information and pictures of multiple persons to the client software in a batch. Meanwhile, you can also export the person information and pictures and save them in your PC.
  • Page 118 DS-K1T643 Series Face Recognition Terminal User Manual 2. Select an added organization in the list, or click Add in the upper-left corner to add an organization and then select it. 3. Click Import to open the Import panel and check Face.

  • Page 119: Get Person Information From Access Control Device

    DS-K1T643 Series Face Recognition Terminal User Manual Note All persons' face pictures will be exported if you do not select any organization. 3. Click Export to open the Export panel and check Face as the content to export. 4. Click Export to start exporting.

  • Page 120: Issue Cards To Persons In Batch

    DS-K1T643 Series Face Recognition Terminal User Manual 9.4.4 Issue Cards to Persons in Batch The client provides a convenient way to issue cards to multiple persons in a batch. Steps 1. Enter Person module. 2. Click Batch Issue Cards. All the added persons with no card issued will be displayed in the right panel.

  • Page 121: Set Card Issuing Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual 9.4.6 Set Card Issuing Parameters The client provides two modes for reading a card's number: via card enrollment station or via the card reader of the access control device. If a card enrollment station is available, connect it to the PC running the client by USB interface or COM, and place the card on the card enrollment to read the card number.

  • Page 122: Configure Schedule And Template

    DS-K1T643 Series Face Recognition Terminal User Manual 9.5 Configure Schedule and Template You can configure the template including holiday and week schedule. After setting the template, you can adopt the configured template to access groups when setting the access groups, so that the access group will take effect in the time durations of the template.

  • Page 123: Add Template

    DS-K1T643 Series Face Recognition Terminal User Manual 6) Optional: Click in the Operation column to delete this added holiday period from the holiday list. 6. Click Save. 9.5.2 Add Template Template includes week schedule and holiday. You can set week schedule and assign the time duration of access authorization for different person or group.

  • Page 124: Set Access Group To Assign Access Authorization To Persons

    DS-K1T643 Series Face Recognition Terminal User Manual Note Up to 4 holidays can be added to one template. 1) Click Holiday tab. 2) Select a holiday in the left list and it will be added to the selected list on the right panel.
  • Page 125 DS-K1T643 Series Face Recognition Terminal User Manual Figure 9-2 Display the Selected Person(s) and Access Point(s) 8. After adding the access groups, you need to apply them to the access control device to take effect. 1) Select the access group(s) to apply to the access control device.

  • Page 126: Configure Advanced Functions

    DS-K1T643 Series Face Recognition Terminal User Manual You can click the prompt to apply the changed data to the device. You can select either Apply Now or Apply Later. Figure 9-4 Data Synchronization 9.7 Configure Advanced Functions You can configure the advanced functions of access control to meet some special requirements in different scene.
  • Page 127 DS-K1T643 Series Face Recognition Terminal User Manual Note If you can not find Device Parameter in the Advanced Function list, hover the cursor on the Advanced Function, and then Click to select the Device Parameter to be displayed. 2. Select an access device to show its parameters on the right page.
  • Page 128 DS-K1T643 Series Face Recognition Terminal User Manual NFC Anti-Cloning If you enable this function, you cannot use the cloned card for authentication and further enhance security. 4. Click OK. 5. Optional: Click Copy to, and then select the access control device(s) to copy the parameters in the page to the selected device(s).
  • Page 129 DS-K1T643 Series Face Recognition Terminal User Manual The alarm can be triggered if the door has not been closed in a configured time period. If it is set as 0, no alarm will be triggered. Lock Door when Door Closed The door can be locked once it is closed even if the Door Locked Time is not reached.
  • Page 130 DS-K1T643 Series Face Recognition Terminal User Manual Note • The displayed parameters may vary for different access control devices. There are part of parameters listed as follows. Refer to the user manual of the device for more details. • Some of the following parameters are not listed in the Basic Information page, click More to edit the parameters.
  • Page 131 DS-K1T643 Series Face Recognition Terminal User Manual View the maximum number of available fingerprints. Existing Fingerprint Number View the number of existed fingerprints in the device. Score The device will score the captured picture according to the yaw angle, pitch angle, and pupillary distance.
  • Page 132 DS-K1T643 Series Face Recognition Terminal User Manual 4. Click OK. 5. Optional: Click Copy to, and then select the card reader(s) to copy the parameters in the page to the selected card reader(s). Configure Parameters for Alarm Output After adding the access control device, if the device links to alarm outputs, you can configure the parameters.

  • Page 133: Configure Device Parameters

    DS-K1T643 Series Face Recognition Terminal User Manual • If you select According to Lane Controller's DIP Settings, the device will follow the lane controller's DIP settings to control the barrier. The settings on the software will be invalid. • If you select According to Main Controller's Settings, the device will follow the settings of the software to control the barrier.
  • Page 134 DS-K1T643 Series Face Recognition Terminal User Manual Note These parameters displayed vary according to different device models. Select a COM port for configuration. COM1 refers to the RS-485 interface and COM2 refers to the RS-232 interface. Face Picture Database select Deep Learning as the face picture database.
  • Page 135 DS-K1T643 Series Face Recognition Terminal User Manual Note When the connection mode is Connect Access Control Device, you can select Card No. or Person ID as the output type. 6. Click Save. • The configured parameters will be applied to the device automatically.

  • Page 136: Door/Elevator Control

    DS-K1T643 Series Face Recognition Terminal User Manual 2. On the navigation bar on the left, enter Advanced Function → More Parameters . 3. Select an access control device in the device list and click M1 Card Encryption to enter the M1 Card Encryption page.

  • Page 137: Check Real-Time Access Records

    DS-K1T643 Series Face Recognition Terminal User Manual Note For Remain All Unlocked and Remain All Locked, ignore this step. 4. Click the following buttons to control the door. Unlock When the door is locked, unlock it and it will be open for once. After the open duration, the door will be closed and locked again automatically.
  • Page 138 DS-K1T643 Series Face Recognition Terminal User Manual Before You Start You have added person(s) and access control device(s) to the client. For details, refer to Person Management and Add Device . Steps 1. Click Monitoring to enter monitoring module. Real-time access records are displayed on the bottom of the page. You can view record details, including card No., person name, event time, door location, temperature, authentication type...
  • Page 139 DS-K1T643 Series Face Recognition Terminal User Manual Note In the pop-up window, you can click to view surveillance details in full screen.

  • Page 140: Appendix A. Tips When Collecting/Comparing Face Picture

    DS-K1T643 Series Face Recognition Terminal User Manual Appendix A. Tips When Collecting/Comparing Face Picture The position when collecting or comparing face picture is as below: Positions (Recommended Distance: 0.5 m) Expression • Keep your expression naturally when collecting or comparing face pictures, just like the expression in the picture below.

  • Page 141: Appendix B. Tips For Installation Environment

    DS-K1T643 Series Face Recognition Terminal User Manual Appendix B. Tips for Installation Environment 1. Light Source Illumination Reference Value Candle: 10Lux Bulb: 100~850Lux Sunlight: More than 1200Lux 2. Avoid backlight, direct and indirect sunlight...

  • Page 142: Appendix C. Dimension

    DS-K1T643 Series Face Recognition Terminal User Manual Appendix C. Dimension...

  • Page 143: Appendix D. Communication Matrix And Device Command

    Device Command Scan the following QR code to get the device common serial port commands. Note that the command list contains all commonly used serial ports commands for all Hikvision access control and video intercom devices. Figure D-2 Device Command...
  • Page 144 UD23342B...

This manual is also suitable for:

Ds-k1t643mx-tDs-k1t643mwx-t

Table of Contents