Blaupunkt BT30LED Owner's Manual page 5

Many thanks to buy our product. This model includes below main features.
Bluetooth function for audio streaming playback.
Ÿ
PLL FM radio with station memory.
Ÿ
USB/MicroSD card playback.
Ÿ
Aux in.
Ÿ
Built-in rechargeable battery power.
Ÿ
Location of controls：
1. AUX in jack.
2. DC 5V power jack and charging LED indicator.
3. On/off switch: push it to power on or off the unit.
4. microSD card slot.
5. USB port.
6. Mode button: short press it to switch the play mode between bluetooth/FM/micrSD/USB and AUX IN.
7-8. Previous/next button: press and hold it to adjust the output volume level.
9. Play and pause button.
Battery charging
This unit had built-in rechargeable lithium battery inside. Before start the playing, please follow up below step for charging.
1. Using the supplied USB to microUSB type charging cable connects the speaker with your USB charger (USB adaptor or USB
output port like on PC, USB rating output: 5V/1A, other USB charger with current equal or above 1A). The microUSB connector
should connect with the DC 5V power jack of speaker, and the another terminal connect with USB charger. Then plug your USB
charger into the household AC power.
2. The charging LED will light on in red color during charging, and the red color LED will off when the battery is fully charged.
3. The speaker will off automatically when the battery power exhausted, please arrange recharge for playing.
4. The output sound may intermittent due to lower power. This is not malfunction. Please arrange it for recharging.
Important: We recommend connect the USB charger with rating output spec at DC 5V/1A, or equal or above 1A output current
USB power. The general USB output on PC (personal computer) is 5V/1A (please reference your PC spec for checking). There may
have some charging noise or abnormal function from speaker if the charging current is too low. If it happened, please remove
the charging power and put the speaker in a while, then the speaker will reset the function in normal. Please kindly note this is
not malfunction.
Notes:
Your battery lifetime will last longer if you follow up below simple guidelines for charging and storing.
a. For charging first time, charge it at least 10 hours.
b. Recharge and store the unit within the temperature range of 5°C~35°C (40°F~95°F).
c. Do not charge longer than 24 hours. Excessive charging or discharging may shorten the battery's life.
d. Battery life naturally shortens slowly over time.
e. Please turn off the speaker if long time not to use.
f. The speaker can play music during charging.
g. Due to prolong charging and discharging, the unit battery life will be affected and playback time will also be shortened. We
cannot guarantee the same playback consistently throughout and this is not include in our warranty and service.
Bluetooth operation
The speaker includes Bluetooth function which allows you to wireless playback the audio with other Bluetooth device like
smart phone etc. Please follow up below for the operation.
1. Switch to Bluetooth mode, then the blue color LED will flare which means the speaker is ready to pair with other device.
2. Enable the Bluetooth function on your Bluetooth device, and search the available Bluetooth device( please reference your
device manual for the operation).
3. Check the available Bluetooth device on the menu list of your device, and select " BP BT30LED" in order to start pairing. Please
key-in "0000" (4 zero) in case of a POP password required during pairing. The blue LED will become stable when the pairing is
successful.
4. Select and play the music on your Bluetooth device. Then the sound will output from speaker.
5. During Bluetooth playback, you can short press the play/pause button to play or pause the music; short press the
previous/next button to select last or next track.
3