Baumatic BHC602 Instruction Manual page 17

o IMPORTANT: You must observe the ventilation requirements
shown in the drawing above. In particular the 20 mm gap
underneath the hob and the 5 mm gap underneath the front
edge of the worktop.
o IMPORTANT: Do not use a silicon sealant to seal the appliance
against the aperture. This will make it difficult to remove the hob
from the aperture in future, particularly if it needs to be
serviced.
o IMPORTANT: There are ventilation
holes around the outside of the hob.
YOU MUST ensure that these holes are
not blocked by the work top, when you
put the hob into position (see drawing
opposite).
o Carefully turn the hob upside down and
place it on a cushioned mat.
17