o If the hob is positioned so that the right or left hand side of the
appliance will be near to the edge of a kitchen unit. There must
be a gap of at least 150 mm between the side of the hob and the
vertical surface of any kitchen unit that is made of a combustible
material. If the vertical surface is made of a non-combustible
material, then 55 mm clearance is sufficient. HOWEVER
sufficient space must be allowed for saucepan handles to be
turned and for saucepans to be used safely.
Unpacking the appliance
When unpacking the appliance please check that the following items
are contained within the packaging:-
1 Hob
1 Installation and instruction manual
1 Guarantee card
4 Fixing brackets
4 Fixing screws
Installing the appliance
o Cut a hole in the worktop that corresponds with the drawing
shown above.
16