Operation - STERWINS 40VBC2-33.1 Manual

Pay particular attention using the machine for the first time : focus and dedicate all your attention to this
FR
first use. Make the first trial on a free space with no obstacle and no surrounding element

4.4 OPERATION

ES
Start the product : illustration 4.1
To turn the tool ON, push and hold the safety lock-off button with your thumb, while squeezing the
PT
ON/OFF trigger switch. Once the trigger switch engages, you can release the safety lock-off button and
proceed with operation.
IT
NOTE : The safety lock-off button reduces the risk of accidental starting.
To turn the tool OFF, release the ON/OFF trigger switch.
Hold the unit
EL
PL
RU
Stand in the operating position. Stand up straight. Do not bend over.
KZ
Keep feet apart and firmly planted.
Hold the shaft grip with the right hand. Keep the right arm slightly bent.
Hold the handle with the left hand. Keep the left arm straight.
UA
Hold the unit at waist level.
Position the cutting head a few inches above the ground.
Do not over-reach; Keep all parts of your body away from the rotating cutting attachment
RO
Install the harness
The harness with quick release function can be hooked behind the hand.
Use the harness at all times adjust both harness and harness clamp on the unit so that the unit hands a
BR
few inches above ground level. Harness the unit on the right side of your body.
Operate the product : illustration 4.1 to 4.6
EN
• Check the product, its battery pack and charger as well as accessories for damage before
each use. Do not use the product if it is damaged or shows wear.
• Double check that the accessories and attachments are properly fixed.
• Always hold the product on its handle. Keep the handle dry to ensure safe support.
• Ensure that the air vents are always unobstructed and clear. Clean them if necessary
with a soft brush. Blocked air vents may lead to overheating and damage the product.
• Switch the product off immediately if you are disturbed while working by other people
entering the working area. Always let the product come to complete stop before putting
it down.
• Do not overwork yourself. Take regular breaks to ensure you can concentrate on the
work and have full control over the product.
WARNING: Always wear eye, hearing, hand, foot and body
protection to reduce the risk of injury when operating this
unit. Keep all parts of your body away from the rotating
cutting attachment.
CAUTION ! Always wear safety glasses. Wear a filter mask if
the operation is dusty. Use of proper gloves and substantial
footwear is also recommended.
328