Electrical Safety; Personal Safety - STERWINS 40VBC2-33.1 Manual

• Keep children and bystanders away while operating a power tool.
FR
Distractions can cause you to lose control.
ES

2.5 ELECTRICAL SAFETY

• Power tool plugs must match the outlet. Never modify the plug in any
PT
way. Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
IT
• Avoid body contact with earthed or grounded surfaces, such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
EL
your body is earthed or grounded.
PL
• Do not expose power tools to rain or wet conditions. Water entering a
power tool will increase the risk of electric shock.
RU
• Do not abuse the cord. Never use the cord for carrying, pulling or
unplugging the power tool. Keep cord away from heat, oil, sharp edges
KZ
or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable
UA
for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric
shock.
RO
• If operating a power tool in a damp location is unavoidable, use a
BR
residual current device (RCD) protected supply. Use of an RCD reduces the risk
of electric shock.
EN

2.6 PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when
operating a power tool. Do not use a power tool while you are tired
or under the influence of drugs, alcohol or medication. A moment of
inattention while operating power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection.
Protective equipment such as a dust mask, non-skid safety shoes, hard hat or hearing
protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off-position
before connecting to power source and/or battery pack, picking up or
carrying the tool. Carrying power tools with your finger on the switch or energising
power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool
on. A wrench or a key left attached to a rotating part of the power tool may result in
personal injury.
318