Safety And Compliance; Electromagnetic Fields (Emf) - Philips HF3670 Manual

Problem
I wanted to snooze, but
the alarm did not go off
again after 9 minutes.
The light wakes me too
early or too late.
I am unable to turn the
Midnight Light function
on/off.
I am unable to stream
music via USB.
The aux inlet doesn't
work properly.
Suddenly the appliance
makes a beeping
sound.

Safety and compliance

Electromagnetic fields (EMF)

Solution
In the Philips SleepMapper app you have several options to set alarms;
perhaps the alarm was not set correctly. Check if you have set the alarm in
the app correctly. Make sure your appliance and the app are connected to
the same home Wi-Fi network when you set an alarm.
You might have accidentally pressed this icon
the alarm. This deactivates the alarm for that day. Tap the top of the
appliance to snooze.
Perhaps the light intensity level you have set is not appropriate for you.
Try a lower light intensity level if you wake up too early or a higher
intensity level of you wake up too late. You can also change the duration
of the wake-up curve. If light intensity 1 is not low enough, move the
appliance further away from the bed. If the light intensity is not high
enough to wake you, make sure that the light of the appliance is not
blocked by any object and the appliance is nearby.
Make sure you tap on the correct position (top/back) of the appliance.
The USB connection is only for charging your mobile phone. You are not
able to stream music to the connected Sleep & Wake-Up Light.
Try to set the volume on your mobile phone either higher or lower. If
necessary, adjust the volume level on the appliance as well.
The backup alarm went off. This can happen up to 8 hours after the
power was removed and a set alarm time is due. The alarm sound stops
automatically after approximately 1 minute. You also can stop the alarm
sound immediately if you power up the appliance for a brief moment.
To prevent the back-up alarm from going off when the power is removed
(e.g. storage) disable the alarms prior to powering down.
This appliance meets the safety requirements in the USA and Canada for:
- UL 153, CSA C22.2 No. 250.4 (Portable Electric Luminaires)
- UL 62368-1, CSA C22.2 No. 62368-1:19 (Audio/Video, Information and
Communication Technology Equipment)
This Philips appliance complies with all applicable standards and
regulations regarding exposure to electromagnetic fields.
English
on the display to dismiss
27