Safety - Philips burton SUPER EXAM 50 LED Instructions For Use & Maintenance

Safety
Important Safety Note:
This product contains a spring-loaded arm. To avoid
damage or possible injury, do not remove the protective
sleeve or rubber band until after you complete the
following steps:
1. First assemble the mount, table, rail, ceiling, or floor.
2. Then insert the lighthead into the mount.
3. Finally, carefully remove the protective plastic sleeve or rubber
band to unfold the product.
The distributor of this product can accept liability for the light only when repairs or
changes are carried out by Philips Burton or Philips Burton-approved companies, and
components that influence the safety of the light are replaced with Philips Burton spare
parts.
The light is not intended for use in areas where there is a risk of explosion.
This product complies with IEC/EC/UL 60601-1 for safety and IEC/EN 60601-1-2
electromagnetic compatibility for medical devices.
The power cable must be replaced only by a qualified electrician or other qualified
professional.
Any repairs to the arm must be performed by Philips Burton or Philips Burton-approved
personnel. As mentioned above, the arm contains high-tension springs.
7