Time + Alarm Back-Up - Philips HF3670 Manual

English
14
Light intensity of the wake-up profile
Type of sound
Remove a wake-up profile

Time + alarm back-up

2 The days of the week are indicated by the first letter of the day. When
an alarm is active, the letter is shown brightly. You can toggle between
the days of the week by using the arrow icons.
3 To deactivate the alarm for a certain day, press this icon
specific day is inactive, the letter of that day is only dimly visible.
The lamp of the appliance simulates a sunrise. Like a sunrise, the
brightness of the lamp increases gradually. During this wake-up curve, the
color of the light changes from soft red to warm orange to bright yellow.
Press icon on the display to choose one of the 25 light intensity levels.
Duration of the wake-up profile
The default duration of the wake-up curve (brightness increase to the set
maximum light intensity) is 30 minutes. The duration can be changed to
your preference by pressing the icon on the appliance.
Press this icon to open the sounds menu to set the sound of the wake-up
profile.
1 Press the toggle icon
natural sounds, radio or no sound.
2 Press the natural sounds icon
press the radio icon
3 You can set the volume with the loudspeaker icon
Press this icon to change the alarm. To remove a wake-up profile, press
.
In the event of a power failure, all functions of the appliance, including
the display, do not work. However, the internal clock and a back-up alarm
remain active for at least 8 more hours.
If during the power failure the set alarm time is due, a back-up alarm goes
off generating a beeping sound for approximately 1 minute.
to choose one of the three sounds options:
to select one of the natural sounds or
to select one of the radio presets.
.When a
.