Sharp HT-X15H Operation Manual page 67

In the stop mode, you can change the amplifier settings on the
TV screen.
1
Press the SET UP AMP but-
Amplifier Setup
ton.
The amplifier setting screen
appears.
Select
2
Press the or button to select the menu and press the
ENTER button.
3
Press the , , or button
Speaker Delay
to change the setting.
Front
Center
Front
Surround
Surround
Select
Repeat the operation as instructed.
(The number of repetitions depends on the setting item.)
To change other settings, begin from step 2.
4
Press the RETURN button twice.
The setting is complete.
Notes:
You cannot change the amplifier settings unless the input source
is set to DVD/CD.
The amplifier settings cannot be changed in the tuner mode and
do not affect the tuner sound.
Speaker delay setting
When some of the speakers are at a different distance from the lis-
tening point, you can select the speaker delay to make it seem as
though the speaker distances are the same.
1
Press the SET UP AMP button.
Speaker Delay
Speaker Level
2
Within 10 seconds, press the
Test Tone
button to select "SP DELAY",
and then press the ENTER button.
Enter Return
ENTER
3
Within 10 seconds, press the
button to select the desired
speaker.
L 2.0 M
The indicator of the selected speaker
2.0 M
flashes.
R 2.0 M
R 2.0 M
L 2.0 M
4
Within 10 seconds, press the
Change Return
button to select the distance.
You can change the distance in
0.1 m steps.
To set the distance of other speak-
ers, repeat the operation from step
3.
5
Press the RETURN
The setting is complete.
Note:
The speaker delay setting is not available when the surround is
"STEREO" or "VIRTUAL (SURROUND)".
05/6/7 HT-X15H(H)E6.fm
HT-X15H
ENGLISH
or
Amplifier Setup
Speaker Delay
Speaker Level
Test Tone
Select ENTER Enter Return
or
Speaker Delay
Front L 2.0 M
Center 2.0 M
Front R 2.0 M
Surround R 2.0 M
Surround L 2.0 M
Select Change Return
or
Speaker Delay
Front L 2.0 M
Center 2.0 M
Front R 2.0 M
Surround R 3.3 M
Surround L 2.0 M
Select Change Return
button twice.
E-56
TINSZA064SJZZ
8