Special Features On Your Vcr; Child Lock - Sharp VC-GH611GM Operation Manual

TINS-A083UMZZEnglish.book Page 24 Monday, November 11, 2002 9:39 AM

SPECIAL FEATURES ON YOUR VCR

CHILD LOCK

You can lock your VCR with this feature. It will work even when the VCR is in standby,
preventing children from operating the VCR.
TO ENGAGE CHILD LOCK
Press and hold
has been activated.
Regardless of what other operating buttons are touched, the VCR will continue to operate in
its present mode. If CHILD LOCK is activated during playback, once the tape reaches its end,
the VCR will automatically rewind the tape, eject it, and turn the power off.
TO DISENGAGE CHILD LOCK
Press and hold
NOTES:
•
•
Downloaded from: http://www.usersmanualguide.com/
on the remote control for about 2 seconds.
flashes and then remains lit on the VCR display confirming that CHILD LOCK
for about 2 seconds.
starts flashing and then disappears. CHILD LOCK is disengaged.
If you attempt to change modes by pressing another button while CHILD LOCK is on,
the indicator will flash on the VCR display.
If power is interrupted for more than 1 hour (due to power failure etc), CHILD LOCK may
disengage.
GB-24