Table of Contents
Advertisement
Quick Links
ES EH Combination Kit Assembly Instructions
Description
ES100 - EH250 Combination Kit
ES100 - EH500 Combination Kit
ES200/300 - EH500 Combination Kit
ES200/300 - EH1200 Combination Kit
ES300 - EH2600/4200 Combination Kit
ES630 - EH1200 Combination Kit
ES630 - EH2600/4200 Combination Kit
Instruction Manual
A352-02-840
Issue A
Original Instructions
Item Number
A52010100
A52010120
A52010130
A52010140
A52010150
A52010160
A52010170
Advertisement
Table of Contents
Related Manuals for Edwards ES Series
Summary of Contents for Edwards ES Series
- Page 1 A352-02-840 Issue A Original Instructions Instruction Manual ES EH Combination Kit Assembly Instructions Description Item Number ES100 - EH250 Combination Kit A52010100 ES100 - EH500 Combination Kit A52010120 ES200/300 - EH500 Combination Kit A52010130 ES200/300 - EH1200 Combination Kit A52010140 ES300 - EH2600/4200 Combination Kit A52010150 ES630 - EH1200 Combination Kit...
- Page 2 Declaration of Conformity Edwards, Innovation Drive, Burgess Hill, West Sussex, RH15 9TW, UK declare under our sole responsibility, as manufacturer and person within the EU authorised to assemble the technical file, that the product(s) ES100 – EH250 Combination Kit A52010100 ES100 –...
-
Page 3: Table Of Contents
Booster installation .....................19 Leak test the system ....................20 For return of equipment, complete the HS Forms at the end of this manual. © Edwards Limited 2014. All rights reserved. Page i Edwards and the Edwards logo are trademarks of Edwards Limited. - Page 4 ES65/ES100/ES200/ES300 and ES630 Single Stage Rotary Vane Pumps A352-01-880 EH Mechanical Booster/ES Single Stage Rotary Pump Combination Pumping Systems A352-02-880 Vacuum Pump and Vacuum System Safety P400-40-100 Page ii © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited.
-
Page 5: Introduction
Remove all packaging and check that all items listed have been received. If not, notify the supplier as soon as possible. © Edwards Limited 2014. All rights reserved. Page 1 Edwards and the Edwards logo are trademarks of Edwards Limited. - Page 6 EH Mechanical Booster/ES Single Stage Rotary Pump Combination Pumping Systems instruction manual A35202840 ES EH Combination Kits instruction manual Page 2 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited.
- Page 7 M12 x 70 hex head screw - stainless steel 218181502 M12 x 80 hex head screw - stainless steel © Edwards Limited 2014. All rights reserved. Page 3 Edwards and the Edwards logo are trademarks of Edwards Limited.
- Page 8 EH Mechanical Booster/ES Single Stage Rotary Pump Combination Pumping Systems instruction manual A35202840 ES EH Combination Kits instruction manual Page 4 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited.
- Page 9 EH Mechanical Booster/ES Single Stage Rotary Pump Combination Pumping Systems instruction manual A35202840 ES EH Combination Kits instruction manual © Edwards Limited 2014. All rights reserved. Page 5 Edwards and the Edwards logo are trademarks of Edwards Limited.
-
Page 10: Eh - Es Direct Mount Assembly Procedure
M10 x 25 - 218181452 (x2) Washer 218981310 (x2) 218981311 218981311 218981311 (x2) S.coil washer 218983510 (x2) 218983511 218983511 218983511 (x2) Page 6 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 11: Adapter Mounting To Booster
B27158170 B27158171 B27158170 B27158171 B27158171 Adapter C10007087 C10007155 C10007155 C10009111 C10007155 C10009111 C10009160 Clamps C10007151 C10007151 C10007151 C10007151 C10007151 C10007151 C10007151 © Edwards Limited 2014. All rights reserved. Page 7 Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 12: Mount The Eh To The Es Pump
EH500 EH1200 EH500 EH1200 EH1200 O-ring B27158170 B27158170 B27158170 C10009111 B27158170 B27158170 B27158171 Clamp C10007151 C10007151 C10007151 C10007151 C10007151 C10007151 C10007151 Page 8 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 13: Leak Test The System
Leak test the system after installation is complete and seal any leaks found. Hazardous substances which leak from the system will be dangerous to people and there will be a danger of explosion if air leaks into the system. Edwards recommend that the leak rate is 1 x 10 mbar l s... -
Page 14: Eh - Es Frame Mount Assembly Procedure
19 mm spanner (for M12) 17 mm socket (for M10) 13 mm spanner (for M8 on claws) 30 mm spanner (for M20 bolt) Page 10 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 15: Base Runner Preparation
1. Work bench 2. Base runners (2 off) 3. Motor side of ES300/630 pump Description ES300 ES630 Base runner A22440102 A22440122 © Edwards Limited 2014. All rights reserved. Page 11 Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 16: Grub Screw Alignment And Installation
ES300 ES630 ES pump weight 180 kg 506 kg Grub screws (4 off) 218430160 218430160 Base runners (2 off) A22440122 A22440102 Page 12 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 17: Base Runner Alignment
C. Secure ES pump to base runners Description Part number M10 nut (4 off) 2189609011 M10 spring washer (4 off) 218983511 M10 washer (4 off) 218981311 © Edwards Limited 2014. All rights reserved. Page 13 Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 18: Main Frame Assembly
C. Connect cross braces to main frame D. Connect upper support channels to main frame E. Connect pump brace to upper support channels Page 14 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited. - Page 19 218181497 218181497 M12 washer 218981312 218981312 M12 spring washer 218983512 218983512 M12 nut 218960912 218960912 M12 x 80 screw 218181502 218181502 © Edwards Limited 2014. All rights reserved. Page 15 Edwards and the Edwards logo are trademarks of Edwards Limited.
-
Page 20: Move Assembly
Refer to Figure Figure 8 - Move assembly A. Attach slings and lift combination from bench B. Place assembly on floor Page 16 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 21: Bellows Installation
Figure 9 - Bellows installation A. Raise EH booster B. Remove blanking flange C. Fit bellows and spacer D. Bellows and spacer assembled © Edwards Limited 2014. All rights reserved. Page 17 Edwards and the Edwards logo are trademarks of Edwards Limited. - Page 22 Spacer C10009120 C10009125 Half claw clamps C10007156 (4 off) not applicable ISO63/100 single claw clamps C10007151 (12 off) C10007151 (16 off) Page 18 © Edwards Limited 2014. All rights reserved. Edwards and the Edwards logo are trademarks of Edwards Limited.
-
Page 23: Booster Installation
A. Raise EH booster B. Lower EH booster onto ES pump Description ES300 ES630 Trapped O-ring B27158170 B27158171 Clamp (8 off) C10007156 C10007151 © Edwards Limited 2014. All rights reserved. Page 19 Edwards and the Edwards logo are trademarks of Edwards Limited. -
Page 24: Leak Test The System
Leak test the system after installation is complete and seal any leaks found. Hazardous substances which leak from the system will be dangerous to people and there will be a danger of explosion if air leaks into the system. Edwards recommend that the leak rate is 1 x 10 mbar l s... - Page 25 This page has been intentionally left blank.
- Page 26 This page has been intentionally left blank.
- Page 27 Download the latest documents from www.edwardsvacuum.com/HSForms/, follow the procedure in HS1, fill in the electronic HS2 form, print it, sign it, and return the signed copy to Edwards. Note: If we do not receive a completed HS2 form, we will not accept the return of the...
- Page 28 edwardsvacuum.com...