Fritz! Box 6850 LTE Configuration And Operation page 30

Connecting
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
• Position the FRITZ!Box in a central location.
• Position the FRITZ!Box in an elevated location.
• Keep sufficient distance from potential sources of interference like
• Position the FRITZ!Box so that it is not covered by other objects and
• Make sure that the FRITZ!Box uses frequency ranges that are used
By slightly shifting the position of the FRITZ!Box it is often possible to
Tip
improve the Wi-Fi connection significantly. If these measures are not
sufficient, then you can extend the range of your Wi-Fi network with a
wireless repeater and Mesh with FRITZ!;
Instructions: Positioning the FRITZ!Box
1.
2.
Instructions: Mounting FRITZ!Box on the Wall
Damage to electric wiring or gas or water pipes during drilling can
Important
present a significant danger. Before mounting the FRITZ!Box on the
wall, make sure that there are no electricity lines, gas or water pipes
located where you need to drill the holes. If necessary, check the site
with a pipe detector or consult with qualified experts.
1.
2.
3.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Box 6850 LTE
DECT base stations, microwave devices or electric devices with
large metal housings.
there are as few walls or other obstacles as possible between it
and the other wireless devices.
by as few other devices as possible.
In compliance with the rules mentioned above, select a suitable
location for the FRITZ!Box.
Place the FRITZ!Box in this location.
In compliance with the rules mentioned above, select a suitable
location for mounting the FRITZ!Box on the wall.
Mark the spots for drilling at the desired location using the
drilling template
Mount the FRITZ!Box on the wall with the socket strip down.
(see page 248).
30
see page 63.