Fritz! Box 6850 LTE Configuration And Operation page 130

User Interface: Home Network Menu
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
7.
8.
The USB printer has been configured and can be used as a network
printer.
Instructions: Configuring a USB Printer in Other Operating Systems
In operating systems other than Windows or Mac OS X, configure the
following settings to set up a USB printer as a network printer:
1.
2.
3.
Configuring USB 3.0 or 2.0 mode
In the FRITZ!Box user interface, the following settings for the USB port
are located under "Home Network / USB/Storage / USB Settings":
Setting
Power Mode
(USB 3.0)
Green Mode
(USB 2.0)
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
FRITZ!Box 6850 LTE
In the "Use:" list, select the printer that is connected to the USB
port of your FRITZ!Box.
If the printer is not displayed, you must first install the printer
drivers for this device. Consult the documentation of your printer
for instructions.
Click on "Add" or "Add Port...".
As the port type, select "Raw TCP".
Enter the port "9100".
Enter "fritz.box" as the printer name.
Function
Full transmission capacity
During operation of USB devices, slow data trans-
mission in the 2.4-GHz Wi-Fi network and poor voice
quality on calls with DECT telephones can occur. This
depends on the quality of the USB cable used. To cor-
rect such deficiencies, switch to the 5-GHz Wi-Fi net-
work or set "Green Mode".
During operation of devices with USB 3.0
Reduced power consumption
•
Reduced transmission capacity
•
130