Table of Contents
Advertisement
Shelves
Cantilever Shelf
Wine Rack
Shelf Adjustment
Refrigerator shelves are easily adjusted to suit individual needs. Before adjusting
shelves, remove all food. Remove and discard shipping clips wedged into the
cantilever rail above the shelf hook (see below). These clips stabilize the shelves
during shipping.
To adjust the cantilever shelves (supported at the rear of the refrigerator), lift the
back of the shelf up and out. Replace shelf by inserting rear hooks into slots. Lower
and lock into position.
Spillsafe™ glass shelves catch and hold accidental
spills. In some models, Spillsafe™ shelves slide out
for easy access to food, and fast cleaning. Shelves
slide out independently of the cantilever bracket. Just
pull front of shelf forward. Shelf can be extended as far
as stopper will allow, and is not removable from the
cantilever bracket.
Remove Shipping Clips
Wine Rack
The wine rack stores bottles of wine, or single 2-liter plastic bottles of juice or soda
pop. To install, slide wine rack onto the shelf with the curve facing in. To
remove, slide wine rack out. Install on either side of a Spillsafe™ shelf.
Slider-Flip Shelf
(some models)
Your Spillsafe™ slider-flip shelf provides more space and organization options.
The slider-flip shelf is adjustable, like your other shelves. Clean your slider-flip shelf
as you would any other inside refrigerator part (please see the Care and Cleaning
S e c t i o n ) .
To suit your need, "flip" the flip shelf as shown below. The shelf will stay in position.
The slider shelf portion slides in and out, like your other refrigerator shelves.
Remember to leave enough space above the shelf to "flip" the flip shelf.
90°
Advertisement
Table of Contents
