Operation Status Indication Leds - Quectel GNSS Series User Manual

Table 2: Switches and Buttons
Part No. Name
S101 ON/OFF
S301 WAKE_UP
S202 BOOT_GNSS
S201 RESET_GNSS

3.4. Operation Status Indication LEDs

Table 3: Operation Status Indication LEDs
Name
GEOFENCE
LG69T (AA)_EVB_User_Guide
Description
Power on/off switch
Wake up LG69T (AA) module
Pressing the BOOT button when LG69T (AA) module is turned
on, the module will enter bootloader download mode.
LG69T (AA) module will be reset through pressing and then
releasing the button.
RESERVED
GEOFENCE
Figure 5: Operation Status Indication LEDs
I/O Description
DO Used to indicate entering or exiting from the geofence state
LG69T (AA) EVB User Guide
1PPS
TXD
GNSS Module Series
11 / 17