Lutron Electronics FORCE GAUGE FG-6005SD Operation Manual page 27

7-8 Decimal point of SD card setting
The numerical data structure of SD card is default used
the " . " as the decimal, for example "20.6" "1000.53" .
But in certain countries ( Europe ...) is used the " , " as
the decimal point, for example " 20,6 " "1000,53".
Under such situation, it should change the Decimal
character at first.
When the lower display show " dEC "
1) Use the "
▲
( 3-7, Fig. 1 ) to select the upper text to " bASIC " or
" Euro ".
USA - Use " . " as the Decimal point with default.
Euro - Use " , " as the Decimal point with default.
2) After select the upper text to " USA " or " Euro ",
press the " Enter Button " ( 3-6, Fig. 1 ) will save the
setting function with default.
7-9 ESC
When the display show " ESC "
When the Display show the text " ESC ", then press the
" SET Button " ( 3-8, Fig. 1 ) or " ESC Button " ( 3-5, Fig. 1 )
will finish the Advanced Setting procedures.
Remark :
During execute the " Advanced Setting " function,
if press " ESC Button " ( 3-5, Fig. 1 ) will exit the
" Advanced Setting " function, the LCD will return
to normal screen.
Button " ( 3-4, Fig. 1 ) or "
24
Button "
▼