Advertisement
60.
Attach Filler Trim to front and rear walls in
each corner. Attach with 8 - 1 1/2" Finishing Nails
per piece. Strips are positioned flush with bottom
skirting.
61.
Trim out side walls by attaching Top Wall Trim. Position with thick end of Bevel downwards at
top of wall, tight against Soffits. Attach with 4 - 1 1/2" Finishing Nails per piece. Complete both sides.
Parts (Step 61)
Top Wall Trim
(3/4" x 1 1/2" x 45 1/4") x 6
62.
Locate Horizontal Gable Trims for both front and rear of shed. Position equally over Gable and
Wall seam. Attach each piece with 5 - 1 1/2" Finishing Nails.
Parts (Step 62)
Horizontal Gable Trims - Bevel
(3/4" x 4 1/2" x 45 1/4") x 3 Rear
(3/4" x 4 1/2" x 68 1/2") x 1 Door
(3/4" x 4 1/2" x 32 1/4") x 2 Window Walls
Toll Free 1-888-658-1658
Parts (Step 60)
(3/4" x 2 1/2" x 81 3/4") x 4
www.outdoorlivingtoday.com
Page 36
Filler Trims
N1 - 1 1/2" Finishing
Important: Thick part of
bevel should be at the top
of the wall.
Hardware (Step 61)
N1 - 1 1/2" Finishing Nails
x 24 total
Hardware (Step 62)
N1 - 1 1/2" Finishing Nails
x 30 total
sales@outdoorlivingtoday.com
Hardware (Step 60)
Nails
x 32 total
Advertisement
