Advertisement
Expert Advice: Do a dry run by lining up Front, Rear and Side Facia to confirm positioning prior to
attaching
68.
Attach Front and Rear Facia (angle cut on ends), to Facia Cleats on front side, with
10 - 1 1/2" Finishing Nails per piece. Line up Facia so Facia ends line up with Rafter ends.
Parts (Step 68, 70)
F&R Facia (angled ends)
(3/4" x 5 1/2" x 81 1/4") x 4
Toll Free 1-888-658-1658
Vertical Door Trims
(1/2" x 3 1/2" x 85") x 2
(3/4" x 1 1/2" x 40") x 8
www.outdoorlivingtoday.com
Page 38
Parts (Step 66)
Parts (Step 67)
Facia Cleat
Hardware (Step 68, 70)
N1 - 1 1/2" Finishing Nails
x 40 total
sales@outdoorlivingtoday.com
Hardware (Step 67)
S2 - 1 1/4" Screws
x 24 total
Advertisement
