Wan Service Setup - Comtrend Corporation VR-3033 User Manual

5.1.1 WAN Service Setup

This screen allows for the configuration of WAN interfaces.
Click the Add button to create a new connection. For connections on ATM or PTM or
ETH WAN interfaces see
To remove a connection, select its Remove column radio button and click Remove.
Heading
Interface
Description
Type
Vlan8021p
VlanMuxId
VlanTpid
IGMP Proxy
IGMP Source
NAT
Firewall
IPv6
MLD Proxy
Mld Source
Remove
Edit
To remove a connection, select its Remove column radio button and click Remove.
NOTE: ETH and ATM service connections cannot coexist. In Default Mode, up to
8 WAN connections can be configured; while VLAN Mux Connection Mode
supports up to 16 WAN connections.
NOTE: Up to 16 PVC profiles can be configured and saved in flash memory.
Also, ETH and PTM/ATM service connections cannot coexist.
Appendix F - Connection
Description
Name of the interface for WAN
Name of the WAN connection
Shows the connection type
VLAN ID is used for VLAN Tagging (IEEE 802.1Q)
Shows 802.1Q VLAN ID
VLAN Tag Protocol Identifier
Shows Internet Group Management Protocol (IGMP) Proxy
status
Shows the status of WAN interface used as IGMP source
Shows Network Address Translation (NAT) status
Shows the Security status
Shows the WAN IPv6 address
Shows Multicast Listener Discovery (MLD) Proxy status
Shows the status of WAN interface used as MLD source
Select interfaces to remove
Click the Edit button to make changes to the WAN interface.
41
Setup.