Table of Contents
Advertisement
USB Host Port (Type A)
This port can be used to connect the router to the print server.
Ethernet (LAN) Ports
Use 10/100 BASE-T RJ-45 cables to connect up to four network devices. These ports
are auto-sensing MDI/X; so either straight-through or crossover cable can be used.
DSL Port
Connect to an ADSL2/2+ or VDSL with this RJ11 Port. This device contains a micro
filter which removes the analog phone signal. If you wish, you can connect a
regular telephone to the same line by using a POTS splitter.
FRONT PANEL
WiFi/WPS Button
Press and release WiFi-WPS button to activate WPS (make sure the WPS is enabled
in Wireless->Security page).
Press and hold WiFi-WPS button more than 10 seconds to enable/disable WiFi.
10
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VR-3033 and is the answer not in the manual?