Table of Contents
Advertisement
Maintenance:
Maintenance or service work must
only be performed once the machi-
ne's moving parts have come to
rest. Machine parts may become
very hot during operation.
• De-energize the machine by dis-
connecting it from the power
supply.
Machine hazard points:
Milling head
• Never touch the milling head when
the machine is running.
Safety information for servicing, maintenance
and fault elimination:
•
Any person who installs, commissions, opera-
tes, inspects, services or maintains the machi-
ne must have read and understood the opera-
ting manual and in particular the safety infor-
mation contained therein.
•
Machine adjustment, maintenance and inspec-
tion work must be carried by appropriately qua-
lified technical staff.
•
Servicing and maintenance work must only be
carried out by appropriately qualified technical
staff.
•
All operating equipment must be secured
against accidental activation or energization.
•
When performing any servicing, maintenance
or repair work de-energize the machine by dis-
connecting it from the supply and ensure that
the machine cannot be switched on again ac-
cidentally. Put up a warning sign prohibiting
reactivation of the machine (lock and tag out
procedure).
©
Basic safety instructions
• If protective guards or other safety devices have
to be removed for servicing or maintenance work,
they must be reinstalled immediately after the
work has been completed.
• Use only listed operating and auxiliary materials.
• Use only genuine spare parts as listed in the
spare parts list.
• Check bolted connections for tightness.
• Before restarting the machine, make sure that no-
body can be endangered by the running machine.
•
Any unsafe operation is prohibited!
•
Never put safety devices inoperative!
•
Never wear hanging or prodruding clothes which could
become trapped in moving machine parts!
•
After maintenance check all safety devices for function!
Consequences when nonobservance:
• Injury hazards for personnel!
• Damage to the machine!
• Modifications of the machine can
affect the correct operation and
safety of the machine!
Modifications to the machine:
The machine may not be modified,
added to or converted unless the
prior consent of the manufacturer
has been granted.
Any alterations to the machine must
have been approved by GERIMA
GmbH.
This also applies to the welding of
the component parts.
12
Advertisement
Table of Contents
