Features - Expert EX-9132C-2 Operation Manual

Product Features
□
□ Data Conversion between RS-232 and RS-422/485 and Ethernet
□
EX-9132C-2 converter device (RS-232＊1 port , RS-232/422⁄485＊1 port ) data/signal
into the TCP/IP package data/signal and send them out with the Ethernet Data Stream; or
convert the TCP/IP package data/signal into serial device data/signal.
□
□ Socket Communication
□
EX-9132C-2 is provided one socket connection.
□
□ Digital I/O Activating (Optional)
□
EX-9132C-2 provides eight TTL of digital I/O.
Convert the sensors' statuses (the sensors are connected to the converter) into the TCP/IP
package data and send them out with the Ethernet Data Stream; or use the TCP/IP
package data to activate/deactivate the specified digital outputs.
□
□ Dynamic IP Configuration
□
Support DHCP client mode, simplifying network address configuration and management.
□
□ Dual LAN Speed
□
Support 10/100 Mbps Ethernet, auto-detected.
□
□ Server / Client Dual Modes
□
EX-9132C-2 converter device can be configured as network server or network client. In
the client mode, it can be installed in network which is protected by NAT router or
firewall without a real IP address.
□
□ Web-based Setup
□
Parameters setup is based on HTTP protocol by using standard browsers (IE and
Netscape). No special software would be required.
□
□ Built-in Security Control
□
Security protect by login password to prevent intruders.
□
□ Remote Update
□
Firmware can be updated directly via Ethernet network to keep up with latest network
standards.
7