Expert EX-9132C-2 Operation Manual page 18

When you activate the tool, it will detect the existence of the installed converters and
depict the converters' status such as IP address, Subnet Mask, MAC Address, and
Device ID (see Figure 3.1). The Setup Tool only can setup one converter at a time.
Thus if there are more than one converter on the network, please shut down or
disconnect other converters. Otherwise the EXBrowser.exe can not detect the converter.
Due to the nature of broadcast UDP packets, EXBrowser has following characteristics:
□
□ Broadcast packets are not limited by subnet. Even if the IP address of the converters
□
and the computer running EXBrowser that do not belong to the same subnet, it still
works fine.
□
□ Broadcast packets can not pass routers. EXBrowser can only be used to monitor
□
devices with computer running EXBrowser in the same segment of local area
network.
17
(Figure 3.1)