Expert EX-9132C-2 Operation Manual page 22

Web Browser Configuration
The following topics are covered in this chapter:
□
□ Serial To Ethernet Converter Setup
□
● Login Setting
● Login Setting Page Field Description
● Parameter Setting
● Parameter Setting Page Field Description
Login Setting
In addition to basic IP address and subnet mask, specific device settings can be set
through HTTP protocol with popular browsers, e.g. Internet Explorer, Netscape,
etc. Setup of the converters is as easy as surfing on WWW, no special software
will be required.
Setup converter device is as easy as surfing on WWW; no special software will be
required. Popular Browsers, such as IE, or Netscape, can easily do the setup
process. In the browser URL field, set the IP address of device directly, to enter
the "Login Setting" page, please follow the steps below.
□
□ Open your browser. This chapter will use IE as an example.
□
□
□ In the browser URL field, type the IP address of the converter directly and
□
press ENTER. (The IP address is what you set using the Device Management
Utility as EXBrowser.)
□
□ To press fourth icon of "Web Browser" on function bar and a "Login
□
Setting" Screen will be shown (see Figure 3.9) to login into the
Alternatively, if the IP address of the converter is already known, you can
connect to the converter directly by providing its IP address in the URL field
21
device.