Table of Contents
Advertisement
Using the air conditioner with the control panel
You can control the air conditioner without the remote controller.
1. Press the On/Off button on the indoor unit control panel.
f The air conditioner will operate in Cool mode.
X
Stop To turn off the air conditioner, press the On/Off button again.
2. Press the Temp and button to adjust the temperature.
f You can increase/decrease the temperature by 1°C.
X
3. Press the Fan Speed button to adjust the fan speed.
f Each time you press the Fan Speed button, the fan speed will change in order of
X
(High) (Auto) (Low).
4. Press the Mode button to select the operation mode.
f You can select operation mode you want by pressing the Mode button.
X
f Each time you press the Mode button, the mode will change in order of Cool, Auto,
X
Dry and Fan.
5. Press the Turbo button to select Turbo mode
• General and duct type air conditioners may show different Fan speeds.
NOTE
10
PAC_아프리카 중동향AP80S0A_IBIM_34514A-02_EN.indd 10
2015-04-23 오후 2:18:53
Advertisement
Table of Contents
