Maintenance - N'oveen OH9 Use Instructions

Tip-Off safety Device
This appliance is provided with a safety device which will switch off the heater in case of
accidental tipping off. To reset, disconnect the plug from the power for a few minutes,
remove the cause of tipping off, then plug the appliance in again. If it still cannot be reset,
ask a qualified technician to check and repair.
Overheat safety device
Your heater is equipped with a safety device that switches off the heater in the event of
overheating. If the safety device operated, please turn the heater off, unplug the appliance
and let it completely cool down, inspect for blockage of air inlet or outlet, attempt to restart
the heater then after.
If the heater fails to operate or the safety device switches the heater off again, return
heater to your nearest service center for examination or repair.

Maintenance

1. Always disconnect the appliance and let it completely cool down before any
maintenance.
2. Use a vacuum cleaner to remove dust on fins.
3. Clean the outside of the unit with a damp cloth and then dry it with a dry cloth. Never
immerse the unit in water, nor let water drip into the unit.
Storing
1. Always disconnect the appliance, let it completely cool down and clean it before storing.
2. If you do not use the device for a long period, put back the unit and the instruction
manual to the original carton and store in a dry and ventilated place.
3. Do not place any heavy items on top of carton during storing as this may damage the
appliance.
11