Connecting To A Network - HP USB-C Travel Dock User Manual

Connecting to a network

You can connect the computer to a network through the dock. This requires an Ethernet cable (purchased
separately).
WARNING!
cable or telephone cable into an RJ-45 (network) jack.
1. Connect the dock to the computer.
2. Connect one end of the Ethernet cable to the RJ-45 (network) jack on the dock and connect the other
end to an RJ-45 wall jack or router.
NOTE:
TV and radio reception, orient the circuitry end of the cable toward the computer.
6 Chapter 2 Using the dock
To reduce the risk of electric shock, fire, or damage to the equipment, do not plug a modem
If the network cable contains noise suppression circuitry (3), which prevents interference from