FRT:
6.1.
1. Remove screws from gearbox head.
2. Remove screws from motor housing.
3. Remove upper section of housing.
4. Remove control rod.
5. Remove electronics from lower section of housing together with motor and gearbox head.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Repair instructions
A BLK 1.3 TE/CSE, 1.6 E
Disassembly - Motor
C-SC_CSSM
2012.07
9/33
Tool:
- Screwdriver
Torx 15