FRT:
6.6.
Disassembly - Gearbox housing / plunger (ABLK 1.6E)
1. Loosen retainer nut and remove cutting head with die and punch.
2. Take punch out of cutting head and remove from lower section of plunger.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Repair instructions
A BLK 1.3 TE/CSE, 1.6 E
C-SC_CSSM
2012.07
18/33
Tool:
-Open-ended spanner
WAF 30