FRT:
7.3. Assembly - Eccentric shaft
1. Fit drive together with needle sleeve in plunger.
2. Insert eccentric shaft into gearbox housing.
(Eccentric shaft must engage in drive)
3. Fit circlip.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Repair instructions
A BLK 1.3 TE/CSE, 1.6 E
C-SC_CSSM
2012.07
25/33
Tool:
- Straight long-nosed pliers
- Circlip pliers