Advertisement
FRT:
7.2. Assembly - Die / punch / gearbox housing (ABLK 1.6E)
1. Fit punch in lower section of plunger and insert in pre-fitted cutting head.
2. Slide retainer nut over cutting head and screw down to gearbox housing.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Repair instructions
A BLK 1.3 TE/CSE, 1.6 E
C-SC_CSSM
2012.07
23/33
Tool:
- Open-ended spanner
WAF 30
Advertisement
