Advertisement
FRT:
7.1. Assembly - Complete plunger (ABLK 1.3.TE/CSE)
1.Connect upper and lower sections of plunger.
2.Connect punch to upper and lower sections of plunger.
3.Insert assembled plunger into die.
4.Coat sliding surface between punch and die with Molykote paste.
All rights reserved by FEIN, especially in case of industrial rights registration.
FEIN retains all rights of disposal, such as copying and circulation.
Repair instructions
A BLK 1.3 TE/CSE, 1.6 E
C-SC_CSSM
2012.07
21/33
Grease:
- Tube 85g
3 21 60 003 19 8
Advertisement
