The Pyko-Out Front Panel - Digigram PYKO-out User Manual

The PYKO-out front panel

1
USB port
2
1. USB port
USB 1.1 interface allowing to store audio files in mp3 format to play them on the outputs.
2. LEDs
Two electroluminescent diodes indicate the network activity and the presence of an audio stream.
3. Reset button
Press this button briefly to reset your PYKO.
If you press it until the LED blinks (approximately 5 seconds), PYKO-out will be is reset to factory
configuration, i.e. to 'Stream Server' mode with IP address 192.168.0.100., DHCP=OFF, and the
UDP/TCP ports to the default UDP and TCP port values (40002 respectively 40004).
4. Headphones out (mini jack)
•
At start-up, PYKO-out announces its IP address on this output.
•
During operation, it plays the audio in parallel of the stereo line output.
3
Reset Button
Light Emitting Diodes
Professional IP
4
PYKO-out
Audio Endpoint
Headphones
out
5