Using Pyko-Out With Audio Manager; Pyko-Out In 'Stand-Alone' Mode - Digigram PYKO-out User Manual

PYKO-out
Professional IP Audio Endpoint

Using PYKO-out with Audio Manager

If you use your PYKOs with Audio Manager, you will first have to either assign an IP address through the web
pages or turn the DHCP on (Audio Manager will then automatically assign an IP address). Audio Manager
Server will detect this address and allow the Audio Manager Client to configure it.
To be detected by Audio Manager, the TCP control port has to be set to "40002", the UDP listening port to
"40004". These are also the values defined in the factory configuration.
You may decide that Audio Manager is to control PYKO-out only in part. In this case, use the PYKO-out html
pages to configure the device accordingly (cf. on-line help of the pages).
For more details on managing PYKO through Audio Manager, please refer to its on line help.

PYKO-out in 'stand-alone' mode

You can now access the embedded html pages that will allow you to configure the device.
9