Information For The User; Overview; Contents Of This Package - Digigram PYKO-out User Manual

INFORMATION FOR THE USER

This equipment has been tested and found to comply with the limits for a CLASS B digital device, pursuant to Part 15 of the FCC
Rules and with the following European and international Standards for:
In order to guarantee compliance with the above standards in an installation, the following must be done:
· the provided cables must not be modified.
· additional cables used must have their respective shield connected to each extremity.
The limits specified in the standards are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
* reorient or relocate the receiving antenna.
* increase the separation between the equipment and the receiver.
* connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
* consult the dealer or an experienced audio/television technician for help.
Note: Connecting this device to peripheral devices that do not comply with CLASS B requirements or using an unshielded peripheral data
cable could also result in harmful interference to radio or television reception. The user is cautioned that any changes or modifications
not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. To ensure
that the use of this product does not contribute to interference, it is necessary to use shielded I/O cables.
This device has been tested and found to comply with the following standards:
•
International: CISPR22 (2005) Class B.
•
Europe: EMC 2004/108/CE specifications.
•
United States: FCC Rules-Part 15-Class B (digital device).
In order to guarantee compliance with the above standards in an installation, the following must be done:
•
the provided cable must not be modified.
•
additional cables used must have their respective shield connected to each extremity.

OVERVIEW

Contents of this package

The package consists of the following components:
•
a PYKO-out device
•
a counterpart for the power connector
Also available (optionally):
•
Power supply with cable and connector mounted.
•
Adaptor for mounting the PYKO-in on a DIN rail
•
Adaptor for mounting the PYKO-in in a 19" rack
Copyright 2008 – 2009 Digigram. All rights reserved.
No portion of this manual may be reproduced without prior written consent from Digigram. The copyright protection claimed here includes
photocopying, translation and/or reformatting of the information contained in this manual.
While every effort has been made to ensure accuracy, Digigram is not responsible for typos, errors or omissions, and reserves the right to make
improvements or changes in the products and programs described without notice.
Digigram, the Digigram logo, and PYKO are registered trademarks or trademarks of Digigram S.A.. All other trademarks are property of their respective
holders.
Professional IP
PYKO-out
Audio Endpoint
3