Download Print this page

Using Pyko-Out With Ethersound - Digigram PYKO-out User Manual

Professional ip ù audio endpoint

Hide thumbs Also See for PYKO-out:

Table of Contents

Next, set the parameters for the three audio stream priority levels (Menu: Audio)

For more details on parameterizing your PYKO-out in 'stand-alone' mode, please refer to on-line help of the

html pages.

Using PYKO-out with EtherSound

PYKO-out is also capable of decoding EtherSound 100/spkr (www.ethersound.com). This is an exclusive

mode of PYKO-out. In this mode, PYKO-out can decode two EtherSound mono streams.

As default setting ex factory, the equipment works in IP mode. Switching from IP mode to EtherSound is done

through the Web pages by selecting the EtherSound mode.

In EtherSound mode, the control of PYKO-out is done through EScontrol. Access to the web pages is no

longer possible.

To switch back to IP mode, PYKO-out needs to be reset (press the 'Reset' button for at least five seconds).

PYKO-out will re-boot with the default factory settings.

Note:

each time PYKO-out is switched from one mode to another, the previous settings are lost, the device reboots in

factory configuration.

Table of Contents

Do you have a question about the PYKO-out and is the answer not in the manual?