Mounting Configuration for N56XX (Laser Aimer) Optics Module without Ears
The illustration below shows a N56XX bottom flush mount with self tapping screws:
Note: Self-tapping screws are recommended at a torque of 2.02±0.6 KG-CM (1.75±0.5 In-LB). The recommended self-tapping
screws are: Textron Plastite 48-2, #2-28 screw or Textron Delta Pt 22, M2.3 screw. Any screw should be tested to verify
proper fit and performance with the module.
Units = mm
5 - 4