Table of Contents
Advertisement
Model HD9155 Production Afterburner Manual
6.4.
DEBUG WINDOW FUNCTIONS
The HD9155 has a text window called "DEBUG". This window can be controlled using the WINDOWS tab
of the project or system configuration in the KeyLog TRACKER™ software or using the Windows radio
button of the 9150 Configware™ software. This window can display additional information on the output
video. Changing the HORIZONTAL position value for the DEBUG window controls what information is
displayed. (The window can not be moved horizontally).
The format and content of the displays may change as the firmware evolves, but here are the current
displays. Some content is intended for use only by the Evertz engineers, and is not documented.
Some displays show a line of @@@@@@@@@@@@@@@@@@@ characters under specific conditions. These
displays are designed to be visible on an oscilloscope that is monitoring the output video (usually in some
analog form).
Hor Pos
Debug Window Name
Value
0
WIN HW
1
WIN TFPHASE
2
WIN TFPHASERR
3
WIN VFLD2
4
WIN VPULL
5
WIN F0
6
WIN V0
7
WIN A0
8
WIN VAPHASE
9
WIN PULLT
10
WIN ILTC
11
WIN REF
12
WIN VIDEO
13
WIN ANC VTR
14
WIN ANC ATR
15
WIN MODES
16
WIN POP UP ERRORS
17
WIN IDLE
18
WIN DLO
19
WIN GPI
20
WIN PRESET STS
21
WIN OP1 STS
22
WIN OP2 STS
23
WIN SLTC
24
WIN REV
Last
WIN RAM
Page 6-6
IN: binary i/o pins DIP: binary dip switch input
VTF: video to film phase ATF: audio to film phase
VTFX:
error of video to film phase wrt target
phase
@@@@@ on field 2 characters
@@@@@ on new picture (pulldown)
@@@@@ on kk frames == 0
@@@@@ on VTR timecode frames == 0
@@@@@ on ATR timecode frames == 0
VPH: video phase APH: audio phase
PULL: pull type of kk
ILTC: LTC reader input
REF: ref src valid phase lock cnt
VID: input video type -> output video type
ANC Video timecode
ANC Audio timecode
RP215 Film ANC encoded information
POP UP ERRORS
Processor Idle Measurement
Data Logging Output
GPI input frame number
STATUS: USER CONFIGURATION
Output 1 - Parallel connecter Pin 9 status
Output 2 - Parallel connecter Pin 5 status
Smoothed LTC stats
Firmware Revision
00000000: ram viewer values
Table 6-3: Debug Window Functions
Revision 1.3
Description
TECHNICAL DESCRIPTION
Advertisement
Table of Contents
