Downconverter Video Connections (Models Hd9155, Hd9155-Aes, Hd9155-Aud); Downconverter Video Connections (Models Hd9155Q, Hd9155Q-Aud); Audio De-Embedder Video Connections (Model Hd9155-Aes, Hd9155-Aud And Hd9155Q-Aud Only) - evertz HD9155 Series Instruction Manual

Model HD9155 Production Afterburner Manual

2.1.1. Downconverter Video Connections (Models HD9155, HD9155-AES, HD9155-AUD)

HD PROG IN Input BNC connector for 10-bit serial digital video signals, compatible with the
SMPTE 292M standard. The HD9155 is capable of working with video formats shown in Table
2-6. This input normally contains video from the camera with embedded RP 188 ancillary time
code that is used to make character burns, VITC, and to control the 3:2 Pulldown of the output
video. On the HD9155-AES and HD9155-AUD model this input will normally be connected to
the HD active loop through output from the De-embedder section of the unit.
SDI OUT These 2 BNC connectors are used to output the downconverted input video as serial
component video, compatible with the SMPTE 259M standard. When the input video format is
1080p/24sF, 3:2 pulldown will be inserted to generate the 29.97 Fps video output. These
outputs may have VITC and character burn-ins inserted.
ANALOG OUT These 2 BNC connectors are a monitor grade composite analog output derived from
the SDI output video and are normally connected to an analog monitor or video recorder.

2.1.2. Downconverter Video Connections (Models HD9155Q, HD9155Q-AUD)

HD PROG IN Input BNC connector for 10-bit serial digital video signals, compatible with the
SMPTE 292M standard. The HD9155Q is capable of working with video formats shown in
Table 2-6.
ancillary time code that is used to make character burns, VITC, and to control the 3:2 Pulldown
of the output video. On the HD9155Q-AUD model this input will normally be connected to the
HD active loop through output from the De-embedder section of the unit.
PROGRAM SDI OUT These 2 BNC connectors are used to output the downconverted input video as
serial component video, compatible with the SMPTE 259M standard. When the input video
format is 1080p/24sF, 3:2 pulldown will be inserted to generate the 29.97 Fps video output.
These "clean" outputs normally have VITC inserted but can be programmed to also have
characters. (See section 5 for information about using the System Parameters) They are
normally connected to a SDI video recorder for creation of presentation quality viewing copies.
MONITOR SDI OUT This BNC connector is used to output the downconverted input video as serial
component video, compatible with the SMPTE 259M standard. When the input video format is
1080p/24sF, 3:2 pulldown will be inserted to generate the 29.97 Fps video output. These
outputs normally have VITC and characters inserted and are normally connected to a SDI
monitor or video recorder for creation of offline editing copies.
MONITOR ANALOG OUT
from the monitor SDI output video and is normally connected to an analog monitor or video
recorder for creation of offline editing copies.
2.1.3. Audio De-Embedder Video Connections
(model HD9155-AES, HD9155-AUD and HD9155Q-AUD Only)
HD IN Input BNC connector for 10-bit serial digital video signals, compatible with the SMPTE 292M
standard. The HD9155 Audio De-embedder is capable of working with video formats shown in
Page 2-2
This input normally contains video from the camera with embedded RP 188
This BNC connector is a monitor grade composite analog output derived
Revision 1.3
INSTALLATION