Mode Menu; Options Menu; Help Menu - evertz HD9155 Series Instruction Manual

Model HD9155 Production Afterburner Manual

4.1.3.2. Mode Menu

The 9150 Configware™ operates in one of two modes set on the Mode menu.
When the software is started up it is in Offline mode. This allows the user to make changes on the
configuration screens of the computer without affecting the operation of the Production Afterburner. When
you have the configuration items the way you want them, you can send them to the Production Afterburner
using the Send Config button. In Offline mode, the COMM indicator on the screen will normally be yellow.
When the software is placed in the Interactive mode changes made on the configuration screens of the
computer are immediately sent to the Production Afterburner so that you can see the effect of the
changes. When you first enter Interactive mode the current configuration shown on the computer screen
is immediately sent to the Production Afterburner. In Interactive mode, the COMM indicator on the screen
e
will normally be green with an and there will be some small dots changing in the indicator as the
software dialogs with the hardware. You will also see various messages and their responses shown on
the status bar at the bottom of the screen.

4.1.3.3. Options Menu

The Options menu is used to set the Communication port you are using to communicate with the
Production Afterburner.
The Standard Select item is used to determine if you want to manually choose the input video standard of
the Production Afterburner or have it automatically detect the incoming video standard.
The Char Inserter item is used to turn the Production Afterburner's character generator windows on or off.
Individual windows can be turned on and off using the Windows screen.
The Stat Bar Timeout item is used to determine how often the status bar at the bottom of the screen will
be refreshed. Status messages will be cleared out after the appropriate timeout selected by this item.

4.1.3.4. Help Menu

The Help menu is used to view the online help file and to see the version of the software.
USING CONFIGWARE Page 4-3
Revision 1.3